Tag Archives: WhatIf

cmdlet, Service, Start

Start-Service

NAME
    Start-Service

SYNOPSIS
    Starts one or more stopped services.

SYNTAX
    Start-Service [-Name] <string[]> [-Exclude <string[]>] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Start-Service -DisplayName <string[]> [-Exclude <string[]>] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Start-Service [-InputObject <ServiceController[]>] [-Exclude <string[]>] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Start-Service cmdlet sends a start message to the Windows Service Controller for each of the specified services. If a service is already running, the message is ignored without error. You can specify the services by their service names or display names, or you can use the InputObject parameter to supply a service object representing the services that you want to start.

PARAMETERS
    -DisplayName <string[]>
        Specifies the display names of the services to be started. Wildcards are permitted.

        Required?                    true
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Exclude <string[]>
        Omits the specified services. The value of this parameter qualifies the Name parameter. Enter a name element or pattern, such as “s*”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Include <string[]>
        Starts only the specified services. The value of this parameter qualifies the Name parameter. Enter a name element or pattern, such as “s*”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -InputObject <ServiceController[]>
        Specifies ServiceController objects representing the services to be started. Enter a Variable that contains the objects, or type a command or expression that gets the objects.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the service names for the service to be started.

        The parameter name is optional. You can use “-Name” or its Alias, “-ServiceName”, or you can omit the parameter name.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Returns an object representing the service. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.ServiceProcess.ServiceController, System.String
        You can pipe objects that represent the services or strings that contain the service names to Start-Service.

OUTPUTS
    None or System.ServiceProcess.ServiceController
        When you use the PassThru parameter, Start-Service generates a System.ServiceProcess.ServiceController object representing the service. Otherwise, this cmdlet does not generate any output.

NOTES

        You can also refer to Start-Service by its built-in Alias, “sasv”. For more information, see about_aliases.

        Start-Service can control services only when the current user has permission to do so. If a command does not work correctly, you might not have the required permissions.

        To find the service names and display names of the services on your system, type “Get-Service“. The service names appear in the Name column, and the display names appear in the DisplayName column.

        You can start only the services that have a start type of “Manual” or “Automatic”. You cannot start the services with a start type of “Disabled”. If a Start-Service command fails with the message “Cannot start service <service-Name> on computer,” use a Get-WmiObject command to find the start type of the service and, if necessary, use a Set-Service command to change the start type of the service.

        Some services, such as Performance Logs and Alerts (SysmonLog) stop automatically if they have no work to do. When Windows PowerShell starts a service that stops itself almost immediately, it displays the following message: “Service <display-Name> start failed.”

    ————————– EXAMPLE 1 ————————–

    C:\PS>Start-Service -Name eventlog

    Description
    ———–
    This command starts the EventLog service on the local computer. It uses the Name parameter to identify the service by its service name.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Start-Service -displayname *remote* -WhatIf

    Description
    ———–
    This command tells what would happen if you started the services with a display name that includes “remote”. It uses the DisplayName parameter to specify the services by their display name instead of by their service name. And, it uses the WhatIf parameter to tell what would happen if the command were executed instead of executing the command.

    ————————– EXAMPLE 3 ————————–

    C:\PS>$s = Get-Service wmi

    C:\PS>Start-Service -InputObject $s -PassThru | Format-List >> services.txt

    Description
    ———–
    These commands start the Windows Management Instrumentation (WMI) service on the computer and add a record of the action to the services.txt file. The first command uses the Get-Service cmdlet to get an object representing the WMI service and store it in the $s Variable.

    The second command uses the Start-Service cmdlet to start the WMI service. It identifies the service by using the InputObject parameter to pass the $s Variable containing the WMI service object to Start-Service. Then, it uses the PassThru parameter to create an object that represents the starting of the service. Without this parameter, Start-Service does not create any output.

    The pipeline operator (|) passes the object that Start-Service creates to the Format-List cmdlet, which formats the object as a list of its properties. The append redirection operator (>>) redirects the output to the services.txt file, where it is added to the end of the existing file.

    ————————– EXAMPLE 4 ————————–

    C:\PS># Start-Service

    Description
    ———–
    This series of commands shows how to start a service when the start type of the service is “Disabled”. The first command, which uses the Start-Service cmdlet to start the Telnet service (tlntsvr), fails.

    C:\PS>Start-Service tlntsvr

    Start-Service : Service ‘Telnet (TlntSvr)’ cannot be started due to the    following error: Cannot start service TlntSvr on computer ‘.’.
    At line:1 char:14
    + Start-Service <<<< tlntsvr

    The second command uses the Get-WmiObject cmdlet to get the Tlntsvr service. This command retrieves an object with the start type property in the StartMode field. The resulting display reveals that the start type of the Tlntsvr service is “Disabled”.

    C:\PS> Get-WmiObject win32_service | Where-Object {$_.Name -eq “tlntsvr”}

    ExitCode : 0
    Name     : TlntSvr
    ProcessId : 0
    StartMode : Disabled
    State     : Stopped
    Status    : OK

    The next command uses the Set-Service cmdlet to change the start type of the Tlntsvr service to “Manual”.

    C:\PS> Set-Service tlntsvr -startuptype manual

    Now, we can resubmit the Start-Service command. This time, the command succeeds.

    C:\PS> Start-Service tlntsvr

    To verify that the command succeeded, use Get-Service.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113406
    Get-Service
    Suspend-Service
    Stop-Service
    Restart-Service
    Resume-Service
    Set-Service
    New-Service

cmdlet, Start, Transaction

Start-Transaction

NAME
    Start-Transaction

SYNOPSIS
    Starts a transaction.

SYNTAX
    Start-Transaction [-Independent] [-RollbackPreference {Error | TerminatingError | Never}] [-Timeout <int>] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Start-Transaction cmdlet starts a transaction, which is a series of commands that are managed as a unit. A transaction can be completed (“committed”), or it can be completely undone (“rolled back”) so that any data changed by the transaction is restored to its original state. Because the commands in a transaction are managed as a unit, either all commands are committed or all commands are rolled back.

    By default, transactions are rolled back automatically if any command in the transaction generates an error, but you can use the RollbackPreference parameter to change this behavior.

    The cmdlets used in a transaction must be designed to support transactions. Cmdlets that support transactions have a UseTransaction parameter. To perform transactions in a provider, the provider must support transactions. The Windows PowerShell Registry provider in Windows Vista and later versions of Windows supports transactions. You can also use the Microsoft.PowerShell.Commands.Management.TransactedString class to include expressions in transactions on any version of Windows that supports Windows PowerShell. Other Windows PowerShell providers can also support transactions.

    Only one transaction can be active at a time. If you start a new, independent transaction while a transaction is in progress (neither completed nor undone), the new transaction becomes the active transaction, and you must commit or roll back the new transaction before making any changes to the original transaction.

    The Start-Transaction cmdlet is one of a set of cmdlets that support the transactions feature in Windows PowerShell. For more information, see about_transactions.

PARAMETERS
    -Independent [<SwitchParameter>]
        Starts a transaction that is independent of any transactions in progress. By default, if you use Start-Transaction while another transaction is in progress, a new subscriber is added to the transaction in progress. This parameter has an effect only when a transaction is already in progress in the session.

        By default, if you use Start-Transaction while a transaction is in progress, the existing transaction object is reused and the subscriber count is incremented. The effect is much like joining the original transaction. An Undo-Transaction command rolls back the entire the transaction. To complete the transaction, you must enter a Complete-Transaction command for each subscriber. Because most transactions that are in progress at the same time are related, the default is sufficient for most uses.

        If you use the Independent parameter, a new transaction is created that can be completed or undone without affecting the original transaction. However, because only one transaction can be active at a time, you must complete or roll back the new transaction before resuming work on the original transaction.

        Required?                    false
        Position?                    named
        Default value                Reuse the original transaction object.
        Accept pipeline input?     false
        Accept wildcard characters? false

    -RollbackPreference <RollbackSeverity>
        Specifies the conditions under which a transaction is automatically rolled back. The default value is “Error”.

        Valid values are:

        — Error: The transaction is rolled back automatically if a terminating or non-terminating error occurs. “Error” is the default.
        — Terminating error: The transaction is rolled back automatically if a terminating error occurs.
        — Never: The transaction is never rolled back automatically.

        Required?                    false
        Position?                    named
        Default value                Error
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Timeout <int>
        Specifies the maximum time, in minutes, that the transaction is active. When the time-out expires, the transaction is automatically rolled back.

        By default, there is no time-out for transactions that are started at the command line. When transactions are started by a script, the default time-out is 30 minutes.

        Required?                    false
        Position?                    named
        Default value                No timeout (infinite)
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        You cannot pipe input to this cmdlet.

OUTPUTS
    None
        This cmdlet does not generate any output.

NOTES

    ————————– EXAMPLE 1 ————————–

    C:\PS>cd hkcu:\software

    PS HKCU:\software> Start-Transaction

    PS HKCU:\software> New-Item MyCompany -UseTransaction

    PS HKCU:\software> New-Itemproperty MyCompany -name MyKey -value 123 -UseTransaction

    PS HKCU:\software> Undo-Transaction

    Description
    ———–
    These commands start and then roll back a transaction. Because the transaction is rolled back, no changes are made to the Registry.

    ————————– EXAMPLE 2 ————————–

    C:\PS>cd hkcu:\software

    PS HKCU:\software> Start-Transaction

    PS HKCU:\software> New-Item MyCompany -UseTransaction

    PS HKCU:\software> New-Itemproperty MyCompany -name MyKey -value 123 -UseTransaction

    PS HKCU:\software> Complete-Transaction

    Description
    ———–
    These commands start and then complete a transaction. No changes are made to the Registry until the Complete-Transaction command is used.

    ————————– EXAMPLE 3 ————————–

    C:\PS>cd HKCU:\software
    PS HKCU:\software> Start-Transaction
    PS HKCU:\software> New-Item -path NoPath -name MyCompany -UseTransaction
    PS HKCU:\software> New-Item -path . -name MyCompany -UseTransaction

    PS HKCU:\software> Start-Transaction -RollbackPreference never
    PS HKCU:\software> New-Item -path NoPath -name MyCompany -UseTransaction
    PS HKCU:\software> New-Item -path . -name MyCompany -UseTransaction

    # Start-Transaction (-RollbackPreference error)

    PS HKCU:\software> Start-Transaction
    PS HKCU:\software> New-Item -path NoPath -Name MyCompany -UseTransaction
    New-Item : The Registry key at the specified path does not exist.
    At line:1 char:9
    + New-Item <<<< -path NoPath -Name MyCompany -UseTransaction

    PS HKCU:\software> New-Item -path . -name MyCompany -UseTransaction
    New-Item : Cannot use transaction. The transaction has been rolled back or has timed out.
    At line:1 char:9
    + New-Item <<<< -path . -name MyCompany -UseTransaction

    # Start-Transaction (-RollbackPreference never)
    PS HKCU:\software> Start-Transaction -RollbackPreference never
    PS HKCU:\software> New-Item -path NoPath -name MyCompany -UseTransaction
    New-Item : The Registry key at the specified path does not exist.
    At line:1 char:9
    + New-Item <<<< -path NoPath -name MyCompany -UseTransaction

    PS HKCU:\software> New-Item -path . -name MyCompany -UseTransaction
     Hive: HKEY_CURRENT_USER\Software

    SKC VC Name                         Property
    — — —-                         ——–
     0 0 MyCompany                     {}

    PS HKCU:\Software> Complete-Transaction
    # Succeeds

    Description
    ———–
    This example demonstrates the effect of changing the RollbackPreference parameter value.

    In the first set of commands, the Start-Transaction command does not use the RollbackPreference parameter. As a result, the default value (“Error”) is used. When an error occurs in a transaction command (the specified path does not exist), the transaction is automatically rolled back.

    In the second set of commands, the Start-Transaction command uses the RollbackPreference parameter with a value of “Never”. As a result, when an error occurs in a transaction command, the transaction is still active and can be completed successfully.

    Because most transactions must be performed without error, the default value of the RollbackPreference parameter is typically preferred.

    ————————– EXAMPLE 4 ————————–

    C:\PS>cd HKCU:\software

    PS HKCU:\software> Start-Transaction
    PS HKCU:\software> New-Item MyCompany -UseTransaction

    PS HKCU:\software> Start-Transaction
    PS HKCU:\software> Get-Transaction
    PS HKCU:\software> New-Item MyCompany2 -UseTransaction

    PS HKCU:\software> Complete-Transaction
    PS HKCU:\software> Complete-Transaction

    PS HKCU:\Software> Get-Transaction

    RollbackPreference SubscriberCount Status
    —————— ————— ——
    Error                2                 Active

    Description
    ———–
    This example shows the effect of using the Start-Transaction command while a transaction is in progress. The effect is much like joining the transaction in progress.

    Although this is a simplified command, this scenario commonly occurs when the transaction involves running a script that includes a complete transaction.

    The first Start-Transaction command starts the transaction. The first New-Item command is part of the transaction.

    The second Start-Transaction command adds a new subscriber to the transaction. The Get-Transaction command now returns a transaction with a subscriber count of 2. The second New-Item command is part of the same transaction.

    No changes are made to the Registry until the entire transaction is completed. To complete the transaction, you must enter two Complete-Transaction commands, one for each subscriber. If you were to roll back the transaction at any point, the entire transaction would be rolled back for both subscribers.

    ————————– EXAMPLE 5 ————————–

    C:\PS>cd HKCU:\software
    PS HKCU:\software> Start-Transaction
    PS HKCU:\software> New-Item MyCompany -UseTransaction

    PS HKCU:\software> Start-Transaction -Independent
    PS HKCU:\software> Get-Transaction
    PS HKCU:\software> Undo-Transaction

    PS HKCU:\software> New-Itemproperty -path MyCompany -name MyKey -value 123 -UseTransaction
    PS HKCU:\software> Complete-Transaction
    PS HKCU:\software> dir my*

    PS HKCU:\Software> Get-Transaction

    RollbackPreference SubscriberCount Status
    —————— ————— ——
    Error                1                 Active

    PS HKCU:\software> Undo-Transaction
    PS HKCU:\software> New-Itemproperty -path MyCompany -name MyKey -value 123 -UseTransaction

    MyKey
    —–
    123

    PS HKCU:\software> Complete-Transaction
    PS HKCU:\software> dir my*

     Hive: HKEY_CURRENT_USER\Software

    SKC VC Name                         Property
    — — —-                         ——–
     0 1 MyCompany                     {MyKey}

    Description
    ———–
    This example shows the effect of using the Independent parameter of Start-Transaction to start a transaction while another transaction is in progress. In this case, the new transaction is rolled back without affecting the original transaction.

    Although the transactions are logically independent, because only one transaction can be active at a time, you must roll back or commit the newest transaction before resuming work on the original transaction.

    The first set of commands starts a transaction. The New-Item command is part of the first transaction.

    In the second set of commands, the Start-Transaction command uses the Independent parameter. The Get-Transaction command that follows shows the transaction object for the active transaction (the newest one). The subscriber count is equal to 1, showing that the transactions are unrelated.

    When the active transaction is rolled back by using an Undo-Transaction command, the original transaction becomes active again.

    The New-ItemProperty command, which is part of the original transaction, completes without error, and the original transaction can be completed by using the Complete-Transaction command. As a result, the Registry is changed.

    ————————– EXAMPLE 6 ————————–

    C:\PS>cd hkcu:\software

    PS HKCU:\software> Start-Transaction
    PS HKCU:\software> New-Item MyCompany1 -UseTransaction
    PS HKCU:\software> New-Item MyCompany2
    PS HKCU:\software> New-Item MyCompany3 -UseTransaction

    PS HKCU:\software> dir my*

    PS HKCU:\software> Complete-Transaction
    PS HKCU:\software> dir my*

    PS HKCU:\Software> dir my*

     Hive: HKEY_CURRENT_USER\Software

    SKC VC Name                         Property
    — — —-                         ——–
     0 0 MyCompany2                     {}

    PS HKCU:\Software> Complete-Transaction

    PS HKCU:\Software> dir my*

     Hive: HKEY_CURRENT_USER\Software

    SKC VC Name                         Property
    — — —-                         ——–
     0 0 MyCompany1                     {}
     0 0 MyCompany2                     {}
     0 0 MyCompany3                     {}

    Description
    ———–
    This example demonstrates that commands that are submitted while a transaction is in progress can be included in the transaction or not included. Only commands that use the UseTransaction parameter are part of the transaction.

    The first and third New-Item commands use the UseTransaction parameter. These commands are part of the transaction. Because the second New-Item command does not use the UseTransaction parameter, it is not part of the transaction.

    The first “dir” command shows the effect. The second New-Item command is completed immediately, but the first and third New-Item commands are not effective until the transaction is committed.

    The Complete-Transaction command commits the transaction. As a result, the second “dir” command shows that all of the new items are added to the Registry.

    ————————– EXAMPLE 7 ————————–

    C:\PS>Start-Transaction -Timeout 2

    # Wait two minutes…

    C:\PS> Get-Transaction

    C:\PS> New-Item HKCU:\Software\MyCompany -UseTransaction

    C:\PS> Start-Transaction -Timeout 2

    # Wait two minutes…

    C:\PS>> Get-Transaction

    RollbackPreference SubscriberCount Status
    —————— ————— ———–
    Error                1                 RolledBack

    C:\PS> New-Item HKCU:\Software\MyCompany -UseTransaction
    New-Item : Cannot use transaction. The transaction has been rolled back or has timed out.
    At line:1 char:9
    + New-Item <<<< MyCompany -UseTransaction

    Description
    ———–
    This command uses the Timeout parameter of Start-Transaction to start a transaction that must be completed within two minutes. If the transaction is not complete when the timeout expires, it is rolled back automatically.

    When the timeout expires, you are not notified, but the Status property of the transaction object is set to RolledBack and commands that use the UseTransaction parameter fail.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=135262
    about_transactions
    Get-Transaction
    Complete-Transaction
    Undo-Transaction
    Use-Transaction

cmdlet, Start, Transcript

Start-Transcript

NAME
    Start-Transcript

SYNOPSIS
    Creates a record of all or part of a Windows PowerShell session in a text file.

SYNTAX
    Start-Transcript [[-Path] <string>] [-Append] [-Force] [-NoClobber] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Start-Transcript cmdlet creates a record of all or part of a Windows PowerShell session in a text file. The transcript includes all command that the user types and all output that appears on the console.

PARAMETERS
    -Append [<SwitchParameter>]
        Adds the new transcript to the end of an existing file. Use the Path parameter to specify the file.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Allows the cmdlet to append the transcript to an existing read-only file. When used on a read-only file, the cmdlet changes the file permission to read-write. Even using the Force parameter, the cmdlet cannot override security restrictions.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -NoClobber [<SwitchParameter>]
        Will not overwrite (replace the contents) of an existing file. By default, if a transcript file exists in the specified path, Start-Transcript overwrites the file without warning.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Path <string>
        Specifies a location for the transcript file. Enter a path to a .txt file. Wildcards are not permitted.

        If you do not specify a path, Start-Transcript uses the path in the value of the $Transcript global Variable. If you have not created this Variable, Start-Transcript stores the transcripts in the $Home\My Documents directory as \PowerShell_transcript.<time-stamp>.txt files.

        If any of the directories in the path do not exist, the command fails.

        Required?                    false
        Position?                    1
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        You cannot pipe objects to this cmdlet.

OUTPUTS
    System.String
        Start-Transcript returns a string that contains a confirmation message and the path to the output file.

NOTES

        To stop a transcript, use the Stop-Transcript cmdlet.

        To record an entire session, add the Start-Transcript command to your profile. For more information, see about_profiles.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Start-Transcript

    Description
    ———–
    This command starts a transcript in the default file location.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Start-Transcript -Path c:\transcripts\transcript0.txt -NoClobber

    Description
    ———–
    This command starts a transcript in the Transcript0.txt file in C:\transcripts. The NoClobber parameter prevents any existing files from being overwritten. If the Transcript0.txt file already exists, the command fails.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113408
    Stop-Transcript

cmdlet, Computer, Stop

Stop-Computer

NAME
    Stop-Computer

SYNOPSIS
    Stops (shuts down) local and remote computers.

SYNTAX
    Stop-Computer [[-ComputerName] <string[]>] [[-Credential] <PSCredential>] [-AsJob] [-Authentication {Default | None | Connect | Call | Packet | PacketIntegrity | PacketPrivacy | Unchanged}] [-Force] [-Impersonation {Default | Anonymous | Identify | Impersonate | Delegate}] [-ThrottleLimit <int>] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Stop-Computer cmdlet shuts down computers remotely. It can also shut down the local computer.

    You can use the parameters of Stop-Computer to run the shutdown operations as a background job, to specify the authentication levels and alternate credentials, to limit the concurrent connections that are created to run the command, and to force an immediate shut down.

    This cmdlet does not require Windows PowerShell remoting unless you use the AsJob parameter.

PARAMETERS
    -AsJob [<SwitchParameter>]
        Runs the command as a background job.

        Note: To use this parameter, the local and remote computers must be configured for remoting and, on Windows Vista and later versions of Windows, you must open Windows PowerShell with the “Run as administrator” option. For more information, see about_remote_requirements“.

        When you use the AsJob parameter, the command immediately returns an object that represents the background job. You can continue to work in the session while the job completes. The job is created on the local computer and the results from remote computers are automatically returned to the local computer. To manage the job, use the Job cmdlets. To get the job results, use the Receive-Job cmdlet.

        For more information about Windows PowerShell background jobs, see about_jobs and see about_remote_Jobs.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Authentication <AuthenticationLevel>
        Specifies the authentication level that is used for the WMI connection. (Stop-Computer uses WMI.) The default value is Packet.

        Valid values are:

        Unchanged:     The authentication level is the same as the previous command.
        Default:         Windows Authentication.
        None:            No COM authentication.
        Connect:         Connect-level COM authentication.
        Call:            Call-level COM authentication.
        Packet:         Packet-level COM authentication.
        PacketIntegrity: Packet Integrity-level COM authentication.
        PacketPrivacy: Packet Privacy-level COM authentication.

        Required?                    false
        Position?                    named
        Default value                4
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ComputerName <string[]>
        Stops the specified computers. The default is the local computer.

        Type the NETBIOS name, IP address, or fully qualified domain name of one or more computers in a comma-separated list. To specify the local computer, type the computername or “localhost”.

        This parameter does not rely on Windows PowerShell remoting. You can use the ComputerName parameter even if your computer is not configured to run remote commands.

        Required?                    false
        Position?                    1
        Default value                .
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Credential <PSCredential>
        Specifies a user account that has permission to perform this action. The default is the current user.

        Type a user name, such as “User01” or “Domain01\User01”, or enter a PSCredential object, such as one from the Get-Credential cmdlet.

        Required?                    false
        Position?                    2
        Default value                Current user
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Forces an immediate shut down of the computers.

        Required?                    false
        Position?                    named
        Default value                False
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Impersonation <ImpersonationLevel>
        Specifies the impersonation level to use when calling WMI. (Stop-Computer uses WMI.) The default value is “Impersonate”.

        Valid values are:

        Default:     Default impersonation.
        Anonymous:    Hides the identity of the caller.
        Identify:     Allows objects to query the credentials of the caller.
        Impersonate: Allows objects to use the credentials of the caller.

        Required?                    false
        Position?                    named
        Default value                Impersonate
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ThrottleLimit <int>
        Specifies the maximum number of concurrent connections that can be established to run this command. If you omit this parameter or enter a value of 0, the default value, 32, is used.

        The throttle limit applies only to the current command, not to the session or to the computer.

        Required?                    false
        Position?                    named
        Default value                32
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        You cannot pipe input to this cmdlet.

OUTPUTS
    None or System.Management.Automation.RemotingJob
        When you use the AsJob parameter, the cmdlet returns a job object (System.Management.Automation.RemotingJob). Otherwise, it does not generate any output.

NOTES

        This cmdlet uses the Win32Shutdown method of the Win32_OperatingSystem WMI class.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Stop-Computer

    Description
    ———–
    This command shuts down the local computer.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Stop-Computer -ComputerName Server01, Server02, localhost

    Description
    ———–
    This command stops two remote computers, Server01 and Server02, and the local computer, identified as “localhost”.

    ————————– EXAMPLE 3 ————————–

    C:\PS>$j = Stop-Computer -ComputerName Server01, Server02 -AsJob

    C:\PS> $results = $j | Receive-Job

    C:\PS> $results

    Description
    ———–
    These commands run a Stop-Computer command as a background job on two remote computers, and then get the results.

    The first command uses the AsJob parameter to run the command as a background job. The command saves the resulting job object in the $j Variable.

    The second command uses a pipeline operator to send the job object in $j to the Receive-Job cmdlet, which gets the job results. The command saves the results in the $results Variable.

    The third command displays the result saved in the $results Variable.

    Because the AsJob parameter creates the job on the local computer and automatically returns the results to the local computer, you can run the Receive-Job command as a local command.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Stop-Computer -comp Server01 -Impersonation anonymous -Authentication PacketIntegrity

    Description
    ———–
    This command restarts the Server01 remote computer. The command uses customized impersonation and authentication settings.

    ————————– EXAMPLE 5 ————————–

    C:\PS>$s = Get-Content domain01.txt

    C:\PS> $c = Get-Credential domain01\admin01

    C:\PS> Stop-Computer -ComputerName $s -Force -ThrottleLimit 10 -Credential $c

    Description
    ———–
    These commands force an immediate shut down of all of the computers in Domain01.

    The first command gets a list of computers in the domain and saves it in the $s Variable.

    The second command gets the credentials of a domain administrator and saves them in the $c Variable.

    The third command shuts down the computers. It uses ComputerName parameter to submit the list of computers in the $s Variable, the Force parameter to force an immediate shutdown, and the Credential parameter to submit the credentials saved in the $c Variable. It also uses the ThrottleLimit parameter to limit the command to 10 concurrent connections.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=135263
    Add-Computer
    Checkpoint-Computer
    Remove-Computer
    Restart-Computer
    Restore-Computer
    Test-Connection

cmdlet, Job, Stop

Stop-Job

NAME
    Stop-Job

SYNOPSIS
    Stops a Windows PowerShell background job.

SYNTAX
    Stop-Job [[-InstanceId] <Guid[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Stop-Job [-Job] <Job[]> [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Stop-Job [[-Name] <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Stop-Job [-Id] <Int32[]> [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Stop-Job [-State {NotStarted | Running | Completed | Failed | Stopped | Blocked}] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Stop-Job cmdlet stops Windows PowerShell background jobs that are in progress. You can use this cmdlet to stop all jobs or stop selected jobs based on their name, ID, instance ID, or state, or by passing a job object to Stop-Job.

    You can use Stop-Job to stop jobs that were started by using Start-Job or the AsJob parameter of Invoke-Command. When you stop a background job, Windows PowerShell completes all tasks that are pending in that job queue and then ends the job. No new tasks are added to the queue after this command is submitted.

    This cmdlet does not delete background jobs. To delete a job, use Remove-Job.

PARAMETERS
    -Id <Int32[]>
        Stops jobs with the specified IDs. The default is all jobs in the current session.

        The ID is an integer that uniquely identifies the job within the current session. It is easier to remember and type than the InstanceId, but it is unique only within the current session. You can type one or more IDs (separated by commas). To find the ID of a job, type “Get-Job” without parameters.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -InstanceId <Guid[]>
        Stops only jobs with the specified instance IDs. The default is all jobs.

        An instance ID is a GUID that uniquely identifies the job on the computer. To find the instance ID of a job, use Get-Job.

        Required?                    false
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Job <Job[]>
        Specifies the jobs to be stopped. Enter a Variable that contains the jobs or a command that gets the jobs. You can also use a pipeline operator to submit jobs to the Stop-Job cmdlet. By default, Stop-Job deletes all jobs that were started in the current session.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -Name <string[]>
        Stops only the jobs with the specified friendly names. Enter the job names in a comma-separated list or use wildcard characters (*) to enter a job name pattern. By default, Stop-Job stops all jobs created in the current session.

        Because the friendly name is not guaranteed to be unique, use the WhatIf and Confirm parameters when stopping jobs by name.

        Required?                    false
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? true

    -PassThru [<SwitchParameter>]
        Returns an object representing the new background job. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -State <JobState>
        Stops only jobs within the specified state. Valid values are NotStarted, Running, Completed, Stopped, Failed, and Blocked.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.Automation.RemotingJob
        You can pipe a job object to Stop-Job.

OUTPUTS
    None or System.Management.Automation.RemotingJob
        When you use the PassThru parameter, Stop-Job returns a job object. Otherwise, this cmdlet does not generate any output.

NOTES

    ————————– EXAMPLE 1 ————————–

    C:\PS>$s = New-PSSession -computername Server01 -credential domain01\admin02

    C:\PS> $j = Invoke-Command -session $s -scriptblock {Start-Job -scriptblock {Get-Eventlog system}}

    C:\PS> Invoke-Command -session $s -scriptblock {param($j) Stop-Job -job $j} -ArgumentList $j

    Description
    ———–
    This example shows how to use the Stop-Job cmdlet to stop a job that is running on a remote computer.

    Because the job was started by using Invoke-Command to run a Start-Job command remotely, the job object is stored on the remote computer, and you must use another Invoke-Command command to run a Stop-Job command remotely. For more information about remote background jobs, see about_remote_Jobs.

    The first command creates a Windows PowerShell session (PSSession) on the Server01 computer and saves the session object in the $s Variable. The command uses the credentials of a domain administrator.

    The second command uses the Invoke-Command cmdlet to run a Start-Job command in the session. The command in the job gets all of the events in the System event log. The resulting job object is stored in the $j Variable.

    The third command stops the job. It uses the Invoke-Command cmdlet to run a Stop-Job command in the PSSession on Server01. Because the job objects are stored in $j, which is a Variable on the local computer, the command uses the “param” keyword to declare the local Variables in the command, and it uses the ArgumentList parameter to supply values for the Variables.

    When the command completes, the job is stopped and the PSSession in $s is available for use.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Stop-Job -state failed

    Description
    ———–
    This command stops all jobs with a State value of “Failed”.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Stop-Job -name job1

    Description
    ———–
    This command stops the Job1 background job.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Stop-Job -Id 1, 3, 4

    Description
    ———–
    This command stops three jobs. It identifies them by their IDs.

    ————————– EXAMPLE 5 ————————–

    C:\PS>Get-Job | Stop-Job

    Description
    ———–
    This command stops all the background jobs in the current session.

    ————————– EXAMPLE 6 ————————–

    C:\PS>Stop-Job -state blocked

    Description
    ———–
    This command stops all the jobs with a job status of “Blocked”.

    ————————– EXAMPLE 7 ————————–

    C:\PS>Get-Job | Format-Table ID, Name, Command, @{Label=”State”;Expression={$_.jobstateinfo.state}}, I
    nstanceID -auto

    Id Name Command                 State InstanceId
    — —- ——-                 —– ———-
     1 Job1 Start-Service schedule Running 05abb67a-2932-4bd5-b331-c0254b8d9146
     3 Job3 Start-Service schedule Running c03cbd45-19f3-4558-ba94-ebe41b68ad03
     5 Job5 Get-Service s*         Blocked e3bbfed1-9c53-401a-a2c3-a8db34336adf

    C:\PS> Stop-Job -instanceid e3bbfed1-9c53-401a-a2c3-a8db34336adf

    Description
    ———–
    These commands show how to stop a job based on its instance ID.

    The first command uses a Get-Job command to get the jobs in the current session. The command uses a pipeline operator (|) to send the jobs to a Format-Table command, which displays a table of the specified properties of each job. The table includes the Instance ID of each job. It uses a calculated property to display the job state.

    The second command uses a Stop-Job command with the InstanceID parameter to stop a selected job.

    ————————– EXAMPLE 8 ————————–

    C:\PS>$j = Invoke-Command -computername Server01 -scriptblock {Get-Eventlog system} -asjob

    C:\PS> $j | Stop-Job -PassThru

    Id    Name    State     HasMoreData     Location         Command
    —    —-    —-     ———–     ——–         ——-
    5     Job5    Stopped    True            judithh-tablet Get-Eventlog system

    Description
    ———–
    This example shows how to use the Stop-Job cmdlet to stop a job that is running on a remote computer.

    Because the job was started by using the AsJob parameter of Invoke-Command, the job object is located on the local computer, even though the job runs on the remote computer. As such, you can use a local Stop-Job command to stop the job.

    The first command uses the Invoke-Command cmdlet to start a background job on the Server01 computer. The command uses the AsJob parameter to run the remote command as a background job.

    This command returns a job object, which is the same job object that Start-Job returns. The command saves the job object in the $j Variable.

    The second command uses a pipeline operator to send the job in the $j Variable to Stop-Job. The command uses the PassThru parameter to direct Stop-Job to return a job object. The job object display confirms that the State of the job is “Stopped”.

    For more information about remote background jobs, see about_remote_Jobs.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113413
    about_jobs
    about_job_details
    about_remote_Jobs
    Start-Job
    Get-Job
    Receive-Job
    Wait-Job
    Remove-Job
    Invoke-Command

cmdlet, Process, Stop

Stop-Process

NAME
    Stop-Process

SYNOPSIS
    Stops one or more running processes.

SYNTAX
    Stop-Process [-Id] <Int32[]> [-Force] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Stop-Process -InputObject <Process[]> [-Force] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Stop-Process -Name <string[]> [-Force] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Stop-Process cmdlet stops one or more running processes. You can specify a process by process name or process ID (PID), or pass a process object to Stop-Process. Stop-Process works only on processes running on the local computer.

    On Windows Vista and later versions of Windows, to stop a process that is not owned by the current user, you must start Windows PowerShell with the “Run as administrator” option. Also, you are prompted for confirmation unless you use the Force parameter.

PARAMETERS
    -Force [<SwitchParameter>]
        Stops the specified processes without prompting for confirmation. By default, Stop-Process prompts for confirmation before stopping any process that is not owned by the current user.

        To find the owner of a process, use the Get-WmiMethod cmdlet to get a Win32_Process object that represents the process, and then use the GetOwner method of the object.

        Required?                    false
        Position?                    named
        Default value                False
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Id <Int32[]>
        Specifies the process IDs of the processes to be stopped. To specify multiple IDs, use commas to separate the IDs. To find the PID of a process, type “Get-Process“. The parameter name (“Id”) is optional.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -InputObject <Process[]>
        Stops the processes represented by the specified process objects. Enter a Variable that contains the objects, or type a command or expression that gets the objects.

        Required?                    true
        Position?                    named
        Default value
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the process names of the processes to be stopped. You can type multiple process names (separated by commas) or use wildcard characters.

        Required?                    true
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Returns an object representing the process. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Diagnostics.Process
        You can pipe a process object to Stop-Process.

OUTPUTS
    None or System.Diagnostics.Process
        When you use the PassThru parameter, Stop-Process returns a System.Diagnostics.Process object that represents the stopped process. Otherwise, this cmdlet does not generate any output.

NOTES

        You can also refer to Stop-Process by its built-in Aliases, “kill” and “spps”. For more information, see about_aliases.

        You can also use the properties and methods of the Windows Management Instrumentation (WMI) Win32_Process object in Windows PowerShell. For more information, see Get-WmiObject and the WMI SDK.

        When stopping processes, be aware that stopping a process can stop process and services that depend on the process. In an extreme case, stopping a process can stop Windows.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Stop-Process -name notepad

    Description
    ———–
    This command stops all instances of the Notepad process on the computer. (Each instance of Notepad runs in its own process.) It uses the Name parameter to specify the processes, all of which have the same name. If you were to use the ID parameter to stop the same processes, you would have to list the process IDs of each instance of Notepad.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Stop-Process -Id 3952 -Confirm -PassThru

    Confirm
    Are you sure you want to perform this action?
    Performing operation “Stop-Process” on Target “notepad (3952)”.
    [Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
    (default is “Y”):y
    Handles NPM(K)    PM(K)     WS(K) VM(M) CPU(s)     Id ProcessName
    ——- ——    —–     —– —– ——     — ———–
         41     2     996     3212    31            3952 notepad

    Description
    ———–
    This command stops a particular instance of the Notepad process. It uses the process ID, 3952, to identify the process. The Confirm parameter directs Windows PowerShell to prompt the user before stopping the process. Because the prompt includes the process name, as well as its ID, this is best practice. The PassThru parameter passes the process object to the formatter for display. Without this parameter, there would be no display after a Stop-Process command.

    ————————– EXAMPLE 3 ————————–

    C:\PS>calc

    c:\PS>$p = Get-Process calc

    c:\PS>Stop-Process -inputobject $p

    c:\PS>Get-Process | Where-Object {$_.HasExited}

    Description
    ———–
    This series of commands starts and stops the Calc process and then detects processes that have stopped.

    The first command (“calc”) starts an instance of the calculator. The second command (“$p = Get-Process calc”), uses the Get-Process cmdlet to get an object representing the Calc process and store it in the $p Variable. The third command (“Stop-Process -inputobject $p”) uses the Stop-Process cmdlet to stop the Calc process. It uses the InputObject parameter to pass the object to Stop-Process.

    The last command gets all of the processes on the computer that were running but that are now stopped. It uses the Get-Process cmdlet to get all of the processes on the computer. The pipeline operator (|) passes the results to the Where-Object cmdlet, which selects the ones where the value of the HasExited property is TRUE. HasExited is just one property of process objects. To find all the properties, type “Get-Process | Get-Member“.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Get-Process lsass | Stop-Process

    Stop-Process : Cannot stop process ‘lsass (596)’ because of the following error: Access is denied
    At line:1 char:34
    + Get-Process lsass | Stop-Process <<<<

    [ADMIN]: C:\PS> Get-Process lsass | Stop-Process
    Warning!
    Are you sure you want to perform this action?
    Performing operation ‘Stop-Process‘ on Target ‘lsass(596)’
    [Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is “Y”):

    [ADMIN]: C:\PS> Get-Process lsass | Stop-Process -Force
    [ADMIN]: C:\PS>

    Description
    ———–
    These commands show the effect of using the Force parameter to stop a process that is not owned by the user.

    The first command uses the Get-Process cmdlet to get the Lsass process. A pipeline operator sends the process to the Stop-Process cmdlet to stop it. As shown in the sample output, the first command fails with an “Access denied” message, because this process can be stopped only by a member of the Administrator’s group on the computer.

    When Windows PowerShell is opened with the “Run as administrator” option, and the command is repeated, Windows PowerShell prompts you for confirmation.

    The second command uses the Force parameter to suppress the prompt. As a result, the process is stopped without confirmation.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113412
    Get-Process
    Start-Process
    Stop-Process
    Wait-Process
    Debug-Process

cmdlet, Content, Set

Set-Content

NAME
    Set-Content

SYNOPSIS
    Writes or replaces the content in an item with new content.

SYNTAX
    Set-Content [-LiteralPath] <string[]> [-Value] <Object[]> [-Credential <PSCredential>] [-Exclude <string[]>] [-Filter <string>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [-UseTransaction] [<CommonParameters>]

    Set-Content [-Path] <string[]> [-Value] <Object[]> [-Credential <PSCredential>] [-Exclude <string[]>] [-Filter <string>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [-UseTransaction] [<CommonParameters>]

DESCRIPTION
    The Set-Content cmdlet is a string-processing cmdlet that writes or replaces the content in the specified item, such as a file. Whereas the Add-Content cmdlet appends content to a file, Set-Content replaces the existing content. You can type the content in the command or send content through the pipeline to Set-Content.

PARAMETERS
    -Credential <PSCredential>
        Specifies a user account that has permission to perform this action. The default is the current user.

        Type a user name, such as “User01” or “Domain01\User01”, or enter a PSCredential object, such as one generated by the Get-Credential cmdlet. If you type a user name, you will be prompted for a password.

        This parameter is not supported by any providers installed with Windows PowerShell

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Exclude <string[]>
        Omits the specified items. The value of this parameter qualifies the Path parameter. Enter a path element or pattern, such as “*.txt”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Filter <string>
        Specifies a filter in the provider’s format or language. The value of this parameter qualifies the Path parameter. The syntax of the filter, including the use of wildcards, depends on the provider. Filters are more efficient than other parameters, because the provider applies them when retrieving the objects, rather than having Windows PowerShell filter the objects after they are retrieved.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Allows the cmdlet to set the contents of a file, even if the file is read-only. Implementation varies from provider to provider. For more information, see about_providers. Even using the Force parameter, the cmdlet cannot override security restrictions.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Include <string[]>
        Changes only the specified items. The value of this parameter qualifies the Path parameter. Enter a path element or pattern, such as “*.txt”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -LiteralPath <string[]>
        Specifies the path to the item that will receive the content. Unlike Path, the value of LiteralPath is used exactly as it is typed. No characters are interpreted as wildcards. If the path includes escape characters, enclose it in single quotation marks. Single quotation marks tell Windows PowerShell not to interpret any characters as escape sequences.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Returns an object representing the content. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Path <string[]>
        Specifies the path to the item that will receive the content. Wildcards are permitted.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Value <Object[]>
        Specifies the new content for the item.

        Required?                    true
        Position?                    2
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -UseTransaction [<SwitchParameter>]
        Includes the command in the active transaction. This parameter is valid only when a transaction is in progress. For more information, see about_transactions.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Object
        You can pipe an object that contains the new value for the item to Set-Content.

OUTPUTS
    None or System.String
        When you use the Passthru parameter, Set-Content generates a System.String object representing the content. Otherwise, this cmdlet does not generate any output.

NOTES

        You can also refer to Set-Content by its built-in Alias, “sc”. For more information, see about_aliases.

        Set-Content is designed for string processing. If you pipe non-string objects to Set-Content, it converts the object to a string before writing it. To write objects to files, use Out-File.

        The Set-Content cmdlet is designed to work with the data exposed by any provider. To list the providers available in your session, type “Get-PSProvider“. For more information, see about_providers.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Set-Content -Path C:\Test1\test*.txt -Value “Hello, World”

    Description
    ———–
    This command replaces the contents of all files in the Test1 directory that have names beginning with “test” with “Hello, World”. This example shows how to specify content by typing it in the command.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Get-Date | Set-Content C:\Test1\date.csv

    Description
    ———–
    This command creates a comma-separated Variable-length (csv) file that contains only the current date and time. It uses the Get-Date cmdlet to get the current system date and time. The pipeline operator passes the result to Set-Content, which creates the file and writes the content.

    If the Test1 directory does not exist, the command fails, but if the file does not exist, the command will create it.

    ————————– EXAMPLE 3 ————————–

    C:\PS>(Get-Content Notice.txt) | ForEach-Object {$_ -replace “Warning”, “Caution”} | Set-Content Notice.txt

    Description
    ———–
    This command replaces all instances of “Warning” with “Caution” in the Notice.txt file.

    It uses the Get-Content cmdlet to get the content of Notice.txt. The pipeline operator sends the results to the ForEach-Object cmdlet, which applies the expression to each line of content in Get-Content. The expression uses the “$_” symbol to refer to the current item and the Replace parameter to specify the text to be replaced.

    Another pipeline operator sends the changed content to Set-Content which replaces the text in Notice.txt with the new content.

    The parentheses around the Get-Content command ensure that the Get operation is complete before the Set operation begins. Without them, the command will fail because the two Functions will be trying to access the same file.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113392
    about_providers
    Add-Content
    Get-Content
    Clear-Content

cmdlet, Date, Set

Set-Date

NAME
    Set-Date

SYNOPSIS
    Changes the system time on the computer to a time that you specify.

SYNTAX
    Set-Date [-Adjust] <TimeSpan> [-DisplayHint {Date | Time | DateTime}] [-Confirm] [-WhatIf] [<CommonParameters>]

    Set-Date [-Date] <DateTime> [-DisplayHint {Date | Time | DateTime}] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Set-Date cmdlet changes the system date and time on the computer to a date and time that you specify. You can specify a new date and/or time by typing a string or by passing a DateTime or TimeSpan object to Set-Date. To specify a new date or time, use the Date parameter. To specify a change interval, use the Adjust parameter.

PARAMETERS
    -Adjust <TimeSpan>
        Adds or subtracts the specified value from the current date and time. You can type an adjustment in standard date and time format for your locale or use the Adjust parameter to pass a TimeSpan object from New-TimeSpan to Set-Date.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Date <DateTime>
        Changes the date and time to the specified values. You can type a new date in the short date format and a time in the standard time format for your locale. Or, you can pass a Date-Time object from Get-Date.

        If you specify a date, but not a time, Set-Date changes the time to midnight on the specified date. If you specify only a time, it does not change the date.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -DisplayHint <DisplayHintType>
        Determines which elements of the date and time are displayed.

        Valid values are:

        — date: displays only the date
        — time: displays only the time
        — datetime: displays the date and time

        This parameter affects only the display. It does not affect the DateTime object that Get-Date retrieves.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.DateTime
        You can pipe a date to Set-Date.

OUTPUTS
    System.DateTime
        Set-Date returns an object that represents the date that it set.

NOTES

        Use this cmdlet cautiously. Changing the date and time on the computer. The change might prevent the computer from receiving system-wide events and updates that are triggered by a date or time. Use the -WhatIf and -Confirm parameters to avoid errors.

        You can use standard .NET methods with the DateTime and TimeSpan objects used with Set-Date, such as AddDays, AddMonths and FromFileTime. For more information, see “DateTime Methods” and “TimeSpan Methods.”

    ————————– EXAMPLE 1 ————————–

    C:\PS>Set-Date -Date (Get-Date).AddDays(3)

    Description
    ———–
    This command adds three days to the current system date. It does not affect the time. The command uses the Date parameter to specify the date. It uses the Get-Date cmdlet to get the current date and time and applies the AddDays .NET method for DateTime objects with a value of 3 (days).

    ————————– EXAMPLE 2 ————————–

    C:\PS>Set-Date -adjust -0:10:0 -DisplayHint time

    Description
    ———–
    This command sets the current system time back by 10 minutes. It uses the Adjust parameter to specify an interval of change and the time change (minus ten minutes) in standard time format for the locale. The DisplayHint parameter tells Windows PowerShell to display only the time, but it does not affect the DateTime object that Set-Date returns.

    ————————– EXAMPLE 3 ————————–

    C:\PS>$t = Get-Date

    C:\PS>Set-Date -Date $t

    Description
    ———–
    These commands change the system date and time on the computer to the date and time saved in the Variable $t. The first command gets the date and stores it in $t. The second command uses the Date parameter to pass the DateTime object in $t to the Set-Date cmdlet.

    ————————– EXAMPLE 4 ————————–

    C:\PS>$90mins = New-TimeSpan -minutes 90

    C:\PS>Set-Date -adjust $90mins

    Description
    ———–
    These commands advance the system time on the local computer by 90 minutes. The first command uses the New-TimeSpan cmdlet to create a TimeSpan object with a 90-minute interval, and then it saves the TimeSpan object in the $90mins Variable. The second command uses the Adjust parameter of Set-Date to adjust the date by the value of the TimeSpan object in the $90mins Variable.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113393
    Get-Date
    New-TimeSpan

cmdlet, ExecutionPolicy, Set

Set-ExecutionPolicy

NAME
    Set-ExecutionPolicy

SYNOPSIS
    Changes the user preference for the Windows PowerShell execution policy.

SYNTAX
    Set-ExecutionPolicy [-ExecutionPolicy] {Unrestricted | RemoteSigned | AllSigned | Restricted | Default | Bypass | Undefined} [[-Scope] {Process | CurrentUser | LocalMachine | UserPolicy | MachinePolicy}] [-Force] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Set-ExecutionPolicy changes the user preference for the Windows PowerShell execution policy.

    To run this command on Windows Vista, Windows Server 2008, and later versions of Windows, you must start Windows PowerShell with the “Run as administrator” option, even if you are a member of the Administrators group on the computer.

    The execution policy is part of the security strategy of Windows PowerShell. It determines whether you can load configuration files (including your Windows PowerShell profile) and run scripts, and it determines which scripts, if any, must be digitally signed before they will run.

    For more information, see about_execution_policies.

PARAMETERS
    -ExecutionPolicy <ExecutionPolicy>
        Specifies a new execution policy for the shell. The parameter name (“Name”) is optional.

        Valid values are:

        — Restricted: Does not load configuration files or run scripts. “Restricted” is the default.

        — AllSigned: Requires that all scripts and configuration files be signed by a trusted publisher, including scripts that you write on the local computer.

        — RemoteSigned: Requires that all scripts and configuration files downloaded from the Internet be signed by a trusted publisher.

        — Unrestricted: Loads all configuration files and runs all scripts. If you run an unsigned script that was downloaded from the Internet, you are prompted for permission before it runs.

        — Bypass: Nothing is blocked and there are no warnings or prompts.

        — Undefined: Removes the currently assigned execution policy from the current scope. This parameter will not remove an execution policy that is set in a Group Policy scope.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Suppresses all prompts. By default, Set-ExecutionPolicy displays a warning whenever you change the execution policy.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Scope <ExecutionPolicyScope>
        Specifies the scope of the execution policy. The default is LocalMachine.

        Valid values are:

        — Process: The execution policy affects only the current Windows PowerShell process.
        — CurrentUser: The execution policy affects only the current user.
        — LocalMachine: The execution policy affects all users of the computer.

        To remove an execution policy from a particular scope, set the execution policy for that scope to Undefined.

        Required?                    false
        Position?                    2
        Default value                LocalMachine
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    Microsoft.PowerShell.ExecutionPolicy, System.String
        You can pipe an execution policy object or a string that contains the name of an execution policy to Set-ExecutionPolicy.

OUTPUTS
    None
        This cmdlet does not return any output.

NOTES

        When you use Set-ExecutionPolicy, the new user preference is written to the Registry and remains unchanged until you change it.

        However, if the “Turn on Script Execution” Group Policy is enabled for the computer or user, the user preference is written to the Registry, but it is not effective, and Windows PowerShell displays a message explaining the conflict. You cannot use Set-ExecutionPolicy to override a Group Policy, even if the user preference is more restrictive than the policy.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Set-ExecutionPolicy remotesigned

    Description
    ———–
    This command sets the user preference for the shell execution policy to RemoteSigned.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Set-ExecutionPolicy Restricted

    Set-ExecutionPolicy : Windows PowerShell updated your local preference successfully, but the setting is overridden by the group policy applied to your system. Due to the override, your shell will retain its current effective execution policy of “AllSigned”. Contact your group policy administrator for more information.
    At line:1 char:20
    + Set-ExecutionPolicy <<<< restricted

    Description
    ———–
    This command attempts to set the execution policy for the shell to “Restricted.” The “Restricted” setting is written to the Registry, but because it conflicts with a Group Policy, it is not effective, even though it is more restrictive than the policy.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Invoke-Command -computername Server01 -scriptblock {Get-ExecutionPolicy} | Set-ExecutionPolicy -Force

    Description
    ———–
    This command gets the execution policy from a remote computer and applies that execution policy to the local computer.

    The command uses the Invoke-Command cmdlet to send the command to the remote computer. Because you can pipe an ExecutionPolicy (Microsoft.PowerShell.ExecutionPolicy) object to Set-ExecutionPolicy, the Set-ExecutionPolicy command does not need an ExecutionPolicy parameter.

    The command does have a Force parameter, which suppresses the user prompt.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy AllSigned -Force

    C:\PS> Get-ExecutionPolicy -list

            Scope ExecutionPolicy
            —– —————
    MachinePolicy         Undefined
     UserPolicy         Undefined
         Process         Undefined
     CurrentUser         AllSigned
     LocalMachine     RemoteSigned

    C:\PS> Get-ExecutionPolicy
    AllSigned

    Description
    ———–
    This example shows how to set an execution policy for a particular scope.

    The first command uses the Set-ExecutionPolicy cmdlet to set an execution policy of AllSigned for the current user. It uses the Force parameter to suppress the user prompts.

    The second command uses the List parameter of Get-ExecutionPolicy to get the execution policies set in each scope. The results show that the execution policy that is set for the current user differs from the execution policy set for all users of the computer.

    The third command uses the Get-ExecutionPolicy cmdlet without parameters to get the effective execution policy for the current user on the local computer. The result confirms that the execution policy that is set for the current user takes precedence over the one set for all users.

    ————————– EXAMPLE 5 ————————–

    C:\PS>Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy Undefined

    Description
    ———–
    This command uses an execution policy value of Undefined to effectively remove the execution policy that is set for the current user scope. As a result, the execution policy that is set in Group Policy or in the LocalMachine (all users) scope is effective.

    If you set the execution policy in all scopes to Undefined and the Group Policy is not set, the default execution policy, Restricted, is effective for all users of the computer.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113394
    Get-ExecutionPolicy
    Set-AuthenticodeSignature
    Get-AuthenticodeSignature
    about_execution_policies
    about_Signing

cmdlet, Item, Set

Set-Item

NAME
    Set-Item

SYNOPSIS
    Changes the value of an item to the value specified in the command.

SYNTAX
    Set-Item [-LiteralPath] <string[]> [[-Value] <Object>] [-Credential <PSCredential>] [-Exclude <string[]>] [-Filter <string>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [-UseTransaction] [<CommonParameters>]

    Set-Item [-Path] <string[]> [[-Value] <Object>] [-Credential <PSCredential>] [-Exclude <string[]>] [-Filter <string>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [-UseTransaction] [<CommonParameters>]

DESCRIPTION
    The Set-Item cmdlet changes the value of an item, such as a Variable or Registry key, to the value specified in the command.

PARAMETERS
    -Credential <PSCredential>
        Specifies a user account that has permission to perform this action. The default is the current user.

        Type a user name, such as “User01” or “Domain01\User01”, or enter a PSCredential object, such as one generated by the Get-Credential cmdlet. If you type a user name, you will be prompted for a password.

        This parameter is not supported by any providers installed with Windows PowerShell.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Exclude <string[]>
        Omits the specified items. The value of this parameter qualifies the Path parameter. Enter a path element or pattern, such as “*.txt”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Filter <string>
        Specifies a filter in the provider’s format or language. The value of this parameter qualifies the Path parameter. The syntax of the filter, including the use of wildcards, depends on the provider. Filters are more efficient than other parameters, because the provider applies them when retrieving the objects, rather than having Windows PowerShell filter the objects after they are retrieved.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Allows the cmdlet to set items that cannot otherwise be changed, such as read-only Alias or Variables. The cmdlet cannot change constant Aliases or Variables. Implementation varies from provider to provider. For more information, see about_providers. Even using the Force parameter, the cmdlet cannot override security restrictions.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Include <string[]>
        Changes only the specified items. The value of this parameter qualifies the Path parameter. Enter a path element or pattern, such as “*.txt”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -LiteralPath <string[]>
        Specifies a path to the location of the new items. Unlike Path, the value of LiteralPath is used exactly as it is typed. No characters are interpreted as wildcards. If the path includes escape characters, enclose it in single quotation marks. Single quotation marks tell Windows PowerShell not to interpret any characters as escape sequences.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Passes an object representing the item to the pipeline. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Path <string[]>
        Specifies a path to the location of the new items. Wildcards are permitted.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Value <Object>
        Specifies a new value for the item.

        Required?                    false
        Position?                    2
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -UseTransaction [<SwitchParameter>]
        Includes the command in the active transaction. This parameter is valid only when a transaction is in progress. For more information, see about_transactions.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Object
        You can pipe an object that represents the new value of the item to Set-Item.

OUTPUTS
    None or an object representing the new or changed item.
        When you use the Passthru parameter, Set-Item generates an object representing the item. Otherwise, this cmdlet does not generate any output.

NOTES

        You can also refer to Set-Item by its built-in Alias, “si”. For more information, see about_aliases.

        The Set-Item cmdlet is not supported by the Windows PowerShell FileSystem provider. To change the values of items in the file system, use Set-Content.

        In the Registry drives, HKLM: and HKCU:, Set-Item changes the data in the (Default) value of a Registry key. To create and change the names of Registry keys, use New-Item and Rename-Item. To change the names and data in Registry values, use New-ItemProperty, Set-ItemProperty, and Rename-ItemProperty.

        The Set-Item cmdlet is designed to work with the data exposed by any provider. To list the providers available in your session, type “Get-PSProvider“. For more information, see about_providers.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Set-Item -Path Alias:np -Value c:\windows\notepad.exe

    Description
    ———–
    This command creates an Alias of “np” for Notepad.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Set-Item -Path env:UserRole -Value Administrator

    Description
    ———–
    This command uses the Set-Item cmdlet to change the value of the “UserRole” Environment Variable to “Administrator”.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Set-Item -Path Function:prompt -Value {‘PS ‘+ $(Get-Date -format t) + ” ” + $(Get-Location) + ‘> ‘}

    Description
    ———–
    This command uses the Set-Item cmdlet to change the “prompt” Function so that it displays the time before the path.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Set-Item -Path Function:prompt -options “AllScope,ReadOnly”

    Description
    ———–
    This command sets the AllScope and ReadOnly options for the “prompt” Function. This command uses the Options dynamic parameter of the Set-Item cmdlet. The Options parameter is available in Set-Item only when you use it with the Alias or Function provider.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113395
    about_providers
    Get-Item
    New-Item
    Remove-Item
    Clear-Item
    Invoke-Item
    Rename-Item
    Move-Item
    Copy-Item