Tag Archives: WarningVariable

cmdlet, Enable, PSSessionConfiguration

Enable-PSSessionConfiguration

NAME
    Enable-PSSessionConfiguration

SYNOPSIS
    Enables the session configurations on the local computer.

SYNTAX
    Enable-PSSessionConfiguration [[-Name] <string[]>] [-Force] [-SecurityDescriptorSddl <string>] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Enable-PSSessionConfiguration cmdlet re-enables registered session configurations that have been disabled by using the Disable-PSSessionConfiguration cmdlet. This is an advanced cmdlet that is designed to be used by system administrators to manage customized session configurations for their users.

    Without parameters, Enable-PSSessionConfiguration re-enables the Microsoft.PowerShell configuration, which is the default configuration that is used for sessions.

    This cmdlet performs the following operations for each enabled configuration:
    — Removes the “deny all” setting from the security descriptor of the configuration or replaces the security descriptor with one that you specify.
    — Turns on the listener that accepts requests on any IP address.
    — Restarts the WinRM service.

    The Enable-PSSessionConfiguration cmdlet calls the Set-WSManQuickConfig cmdlet. However, it should not be used to enable remoting on the computer. Instead, use the more comprehensive cmdlet, Enable-PSRemoting.

PARAMETERS
    -Force [<SwitchParameter>]
        Suppresses all user prompts, and restarts the WinRM service without prompting. Restarting the service makes the configuration change effective.

        To prevent a restart and suppress the restart prompt, use the NoServiceRestart parameter.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the names of session configurations to enable. Enter one or more configuration names. Wildcards are permitted.

        You can also pipe a string that contains a configuration name or a session configuration object to Enable-PSSessionConfiguration.

        If you omit this parameter, Enable-PSSessionConfiguration enables the Microsoft.PowerShell session configuration.

        Required?                    false
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? true

    -SecurityDescriptorSddl <string>
        Replaces the security descriptor on the session configuration with the specified security descriptor.

        If you omit this parameter, Enable-PSSessionConfiguration just deletes the “deny all” item from the security descriptor.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    Microsoft.PowerShell.Commands.PSSessionConfigurationCommands#PSSessionConfiguration, System.String
        You can pipe a session configuration object or a string that contains the name of a session configuration to Enable-PSSessionConfiguration.

OUTPUTS
    None
        This cmdlet does not return any objects.

NOTES

        To run this cmdlet on Windows Vista, Windows Server 2008, and later versions of Windows, you must start Windows PowerShell with the “Run as administrator” option.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Enable-PSSessionConfiguration

    Description
    ———–
    This command re-enables the Microsoft.PowerShell default session configuration on the computer.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Enable-PSSessionConfiguration -Name MaintenanceShell, AdminShell

    Description
    ———–
    This command re-enables the MaintenanceShell and AdminShell session configurations on the computer.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Enable-PSSessionConfiguration -Name *

    C:\PS> Get-PSSessionConfiguration | Enable-PSSessionConfiguration

    Description
    ———–
    These commands re-enable all session configurations on the computer. The commands are equivalent, so you can use either one.

    Enable-PSSessionConfiguration does not generate an error if you enable a session configuration that is already enabled.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Enable-PSSessionConfiguration -Name MaintenanceShell -SecurityDescriptorSddl “O:NSG:BAD:P(A;;GXGWGR;;;BA)(A;;GAGR;;;S-1-5-21-123456789-188441444-3100496)S:P”

    Description
    ———–
    This command re-enables the MaintenanceShell session configuration and specifies a new security descriptor for the configuration.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=144301
    about_Session_Configurations
    Disable-PSSessionConfiguration
    Get-PSSessionConfiguration
    Register-PSSessionConfiguration
    Set-PSSessionConfiguration
    Unregister-PSSessionConfiguration
    WS-Management Provider

cmdlet, Enable, WSManCredSSP

Enable-WSManCredSSP

NAME
    Enable-WSManCredSSP

SYNOPSIS
    Enables Credential Security Service Provider (CredSSP) authentication on a client computer.

SYNTAX
    Enable-WSManCredSSP [-Role] <string> [[-DelegateComputer] <string>] [<CommonParameters>]

DESCRIPTION
    The Enable-WSManCredSPP cmdlet enables CredSSP authentication on a client or on a server computer. When CredSSP authentication is used, the user’s credentials are passed to a remote computer to be authenticated. This type of authentication is designed for commands that create a remote session from within another remote session. For example, you use this type of authentication if you want to run a background job on a remote computer.

    This cmdlet is used to enable CredSSP on the client by specifying Client in the Role parameter. The cmdlet then performs the following:

        – Enables CredSSP on the client. The WS-Management setting <localhost|computername>\Client\Auth\CredSSP is set to true.
        – Sets the Windows CredSSP policy AllowFreshCredentials to WSMan/Delegate on the client.
        – Note: These settings allow the client to delegate explicit credentials to a server when server authentication is achieved.

    This cmdlet is used to enable CredSSP on the server by specifying Server in the Role parameter. The cmdlet then performs the following:

     – Enables CredSSP on the server. The WS-Management setting <localhost|computername>\Service\Auth\CredSSP is set to true.
     – Note: This policy setting allows the server to act as a delegate for clients.

    Caution: CredSSP authentication delegates the user’s credentials from the local computer to a remote computer. This practice increases the security risk of the remote operation. If the remote computer is compromised, when credentials are passed to it, the credentials can be used to control the network session.

    To disable CredSSP authentication, use the Disable-WSManCredSSP cmdlet.

PARAMETERS
    -DelegateComputer <string>
        Allows the client credentials to be delegated to the server or servers that are specified by this parameter. The value of this parameter should be a fully qualified domain name.

        If the Role parameter specifies Client, the DelegateComputer parameter is mandatory.
        If the Role parameter specifies Server, the DelegateComputer parameter is not allowed.

        Required?                    false
        Position?                    2
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Role <string>
        Accepts one of two possible values: Client or Server. These values specify whether CredSSP should be enabled as a client or as a server.

        If the Role parameter specifies Client, the cmdlet performs the following:

            – Enables CredSSP on the client. The WS-Management setting <localhost|computername>\Client\Auth\CredSSP is set to true.
            – Sets the Windows CredSSP policy AllowFreshCredentials to WSMan/Delegate on the client.
            – Note: These settings allow the client to delegate explicit credentials to a server when server authentication is achieved.

        If the Role parameter specifies the Server, the cmdlet performs the following:

         – Enables CredSSP on the server. The WS-Management setting <localhost|computername>\Service\Auth\CredSSP is set to true.
         – Note: This policy setting allows the server to act as a delegate for clients.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        This cmdlet does not accept any input.

OUTPUTS
    System.Xml.XmlElement
        If CredSSP authentication is successfully enabled, this cmdlet generates an XMLElement object.

NOTES

    ————————– EXAMPLE 1 ————————–

    C:\PS>Enable-WSManCredSSP -Role client -DelegateComputer server02.accounting.fabrikam.com

    cfg         : http://schemas.microsoft.com/wbem/wsman/1/config/client/auth
    lang        : en-US
    Basic     : true
    Digest     : true
    Kerberos    : true
    Negotiate : true
    Certificate : true
    CredSSP     : true

    Description
    ———–
    This command allows the client credentials to be delegated to the server02 computer.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Enable-WSManCredSSP -Role client -DelegateComputer *.accounting.fabrikam.com

    cfg         : http://schemas.microsoft.com/wbem/wsman/1/config/client/auth
    lang        : en-US
    Basic     : true
    Digest     : true
    Kerberos    : true
    Negotiate : true
    Certificate : true
    CredSSP     : true

    Description
    ———–
    This command allows the client credentials to be delegated to all the computers in the accounting.fabrikam.com domain.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Enable-WSManCredSSP -Role client -DelegateComputer server02.accounting.fabrikam.com, server03.accounting.fabrikam.com, server04.accounting.fabrikam.com

    cfg         : http://schemas.microsoft.com/wbem/wsman/1/config/client/auth
    lang        : en-US
    Basic     : true
    Digest     : true
    Kerberos    : true
    Negotiate : true
    Certificate : true
    CredSSP     : true

    Description
    ———–
    This command allows the client credentials to be delegated to multiple computers.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Enable-WSManCredSSP -Role server

    Description
    ———–
    This command allows a computer to act as a delegate for another. The Enable-WSManCredSSP cmdlet (shown in the earlier examples) only enables CredSSP authentication on the client, and specifies the remote computers that can act on it’s behalf. In order for the remote computer to act as a delegate for the client, the CredSSP item in the Service node of WSMan must be set to true.

    ————————– EXAMPLE 5 ————————–

    C:\PS>Connect-WSMan server02
    Set-Item WSMan:\server02\service\auth\credSSP -value $true

    Description
    ———–
    This command allows a computer to act as a delegate for another computer. The Enable-WSManCredSSP commands that are shown in the earlier examples enable CredSSP authentication only on the client computer, and they specify the remote computers that can act on behalf of the client computer. For the remote computer to act as a delegate for the client computer, the CredSSP item in the Service directory of the WSMan provider must be set to true.

    In this example, the first command creates a connection to the remote server02 computer.

    The second command sets the credSSP value on the remote server02 computer, which allows the remote computer to act as a delegate.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkId=141442
    Connect-WSMan
    Disable-WSManCredSSP
    Disconnect-WSMan
    Get-WSManCredSSP
    Get-WSManInstance
    Invoke-WSManAction
    New-WSManInstance
    New-WSManSessionOption
    Remove-WSManInstance
    Set-WSManInstance
    Set-WSManQuickConfig
    Test-WSMan

cmdlet, Disconnect, WSMan

Disconnect-WSMan

NAME
    Disconnect-WSMan

SYNOPSIS
    Disconnects the client from the WinRM service on a remote computer.

SYNTAX
    Disconnect-WSMan [-ComputerName <string>] [<CommonParameters>]

DESCRIPTION
    The Disconnect-WSMan cmdlet disconnects the client from the WinRM service on a remote computer. If you saved the WS-Management session in a Variable, the session object remains in the Variable, but the state of the WS-Management session is “Closed”. You can use this cmdlet within the context of the WS-Management provider to disconnect the client from the WinRM service on a remote computer. However, you can also use this cmdlet to disconnect from the WinRM service on remote computers before you change to the WS-Management provider.

    For more information about how to connect to the WinRM service on a remote computer, see Connect-WSMan.

PARAMETERS
    -ComputerName <string>
        Specifies the computer from which you want to disconnect. The value can be a fully qualified domain name, a NetBIOS name, or an IP address. Use the local computer name, use localhost, or use a dot (.) to specify the local computer. The local computer is the default. When the remote computer is in a different domain from the user, you must use a fully qualified domain name must be used. You can pipe a value for this parameter to the cmdlet.

        Note: You cannot disconnect from the local host (the default connection to the local computer). However, if a separate connection is made to the local computer (for example, by using the computer name), you can remove that connection by using the Disconnect-WSMan cmdlet .

        Required?                    false
        Position?                    named
        Default value                localhost
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        This cmdlet does not accept any input.

OUTPUTS
    None
        This cmdlet does not generate any output.

NOTES

    ————————– EXAMPLE 1 ————————–

    C:\PS>Disconnect-WSMan -computer server01

    C:\PS> cd WSMan:
    PS WSMan:\>
    PS WSMan:\> dir

     WSManConfig: Microsoft.WSMan.Management\WSMan::WSMan

    ComputerName                                 Type
    ————                                 —-
    localhost                                     Container

    Description
    ———–
    This command deletes the connection to the remote server01 computer.

    This cmdlet is generally used within the context of the WS-Management provider to disconnect from a remote computer, in this case the server01 computer. However, you can also use the Disconnect-WSMan cmdlet to remove connections to remote computers before you change to the WSMan provider. Those connections will not appear in the ComputerName list.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkId=141439
    Connect-WSMan
    Disable-WSManCredSSP
    Enable-WSManCredSSP
    Get-WSManCredSSP
    Get-WSManInstance
    Invoke-WSManAction
    New-WSManInstance
    New-WSManSessionOption
    Remove-WSManInstance
    Set-WSManInstance
    Set-WSManQuickConfig
    Test-WSMan

cmdlet, ComputerRestore, Enable

Enable-ComputerRestore

NAME
    Enable-ComputerRestore

SYNOPSIS
    Enables the System Restore feature on the specified file system drive.

SYNTAX
    Enable-ComputerRestore [-Drive] <string[]> [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Enable-ComputerRestore cmdlet turns on the System Restore feature on one or more file system drives. As a result, you can use tools, such as the Restore-Computer cmdlet, to restore the computer to a previous state.

    By default, System Restore is enabled on all eligible drives, but you can disable it, such as by using the Disable-ComputerRestore cmdlet. To enable (or re-enable) System Restore on any drive, it must be enabled on the system drive, either first or concurrently. To find the state of System Restore for each drive, use Rstrui.exe.

PARAMETERS
    -Drive <string[]>
        Specifies the file system drives. Enter one or more file system drive letters, each followed by a colon and a backslash and enclosed in quotation marks, such as “C:\” or “D:\”. This parameter is required.

        You cannot use this cmdlet to enable System Restore on a remote network drive, even if the drive is mapped to the local computer, and you cannot enable System Restore on drives that are not eligible for System Restore, such as external drives.

        To enable System Restore on any drive, System Restore must be enabled on the system drive, either before or concurrently.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        You cannot pipe objects to this cmdlet.

OUTPUTS
    None
        This cmdlet does not generate any output.

NOTES

        Disable-ComputerRestore and Enable-ComputerRestore work only on client operating systems, such as Windows Vista and Windows XP.

        To run an Enable-ComputerRestore command on Windows Vista and later versions of Windows, open Windows PowerShell with the “Run as administrator” option.

        To find the file system drives that are eligible for system restore, in System in Control Panel, see the System Protection tab. To open this tab in Windows PowerShell, type “SystemPropertiesProtection”.

        This cmdlet uses the Windows Management Instrumentation (WMI) SystemRestore class.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Enable-ComputerRestore -Drive “C:\”

    Description
    ———–
    This command enables System Restore on the C: drive of the local computer.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Enable-ComputerRestore -Drive “C:\”, “D:\”

    Description
    ———–
    This command enables System Restore on the C: and D: drives of the local computer.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=135209
    Disable-ComputerRestore
    Get-ComputerRestorePoint
    Restore-Computer
    Restart-Computer

cmdlet, Enable, PSBreakpoint

Enable-PSBreakpoint

NAME
    Enable-PSBreakpoint

SYNOPSIS
    Enables the breakpoints in the current console.

SYNTAX
    Enable-PSBreakpoint [-Id] <Int32[]> [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Enable-PSBreakpoint [-Breakpoint] <Breakpoint[]> [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Enable-PSBreakpoint cmdlet re-enables disabled breakpoints. You can use it to enable all breakpoints, or you can specify breakpoints by submitting breakpoint objects or breakpoint IDs.

    A breakpoint is a point in a script where execution stops temporarily so that you can examine the instructions in the script. Newly created breakpoints are automatically enabled, but you can disable them by using the Disable-PSBreakpoint cmdlet.

    Technically, this cmdlet changes the value of the Enabled property of a breakpoint object to True.

    Enable-PSBreakpoint is one of several cmdlets designed for debugging Windows PowerShell scripts. For more information about the Windows PowerShell debugger, see about_debuggers.

PARAMETERS
    -Breakpoint <Breakpoint[]>
        Specifies the breakpoints to enable. Enter a Variable that contains breakpoint objects or a command that gets breakpoint objects, such as a Get-PSBreakpoint command. You can also pipe breakpoint objects to Enable-PSBreakpoint.

        Required?                    true
        Position?                    1
        Default value                None.
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Id <Int32[]>
        Enables breakpoints that have the specified breakpoint IDs. The default value is all breakpoints. Enter the IDs or a Variable that contains the IDs. (You cannot pipe IDs to Enable-PSBreakpoint.) To find the ID of a breakpoint, use the Get-PSBreakpoint cmdlet.

        Required?                    true
        Position?                    1
        Default value                None
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Returns an object representing the enabled breakpoint. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value                No output
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.Automation.Breakpoint
        You can pipe a breakpoint object to Enable-PSBreakpoint.

OUTPUTS
    None or System.Management.Automation.Breakpoint
        When you use the PassThru parameter, Enable-PSBreakpoint returns a breakpoint object that represent that breakpoint that was enabled. Otherwise, this cmdlet does not generate any output.

NOTES

        The Enable-PSBreakpoint cmdlet does not generate an error if you try to enable a breakpoint that is already enabled. As such, you can enable all breakpoints without error, even when only a few are disabled.

        Breakpoints are enabled when you create them by using the Set-PSBreakpoint cmdlet. You do not need to enable newly created breakpoints.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Get-PSBreakpoint | Enable-PSBreakpoint

    Description
    ———–
    This command enables all breakpoints in the current console. You can abbreviate the command as “gbp | ebp”.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Enable-PSBreakpoint -Id 0, 1, 5

    Description
    ———–
    This command enables breakpoints with breakpoint IDs 0, 1, and 5.

    ————————– EXAMPLE 3 ————————–

    C:\PS>$b = Set-PSBreakpoint -script sample.ps1 -variable Name

    C:\PS> $b | Disable-PSBreakpoint -PassThru

    AccessMode : Write
    Variable : Name
    Action     :
    Enabled    : False
    HitCount : 0
    Id         : 0
    Script     : C:\ps-test\sample.ps1
    ScriptName : C:\ps-test\sample.ps1

    C:\PS> $b | Enable-PSBreakpoint -PassThru

    AccessMode : Write
    Variable : Name
    Action     :
    Enabled    : True
    HitCount : 0
    Id         : 0
    Script     : C:\ps-test\sample.ps1
    ScriptName : C:\ps-test\sample.ps1

    Description
    ———–
    These commands re-enable a breakpoint that has been disabled.

    The first command uses the Set-PSBreakpoint cmdlet to create a breakpoint on the “Name” Variable in the Sample.ps1 script. Then, it saves the breakpoint object in the $b Variable.

    The second command uses the Disable-PSBreakpoint cmdlet to disable the new breakpoint. It uses a pipeline operator (|) to send the breakpoint object in $b to the Disable-PSBreakpoint cmdlet, and it uses the PassThru parameter of Disable-PSBreakpoint to display the disabled breakpoint object. This lets you verify that the value of the Enabled property of the breakpoint object is False.

    The third command uses the Enable-PSBreakpoint cmdlet to re-enable the breakpoint. It uses a pipeline operator (|) to send the breakpoint object in $b to the Enable-PSBreakpoint cmdlet, and it uses the PassThru parameter of Enable-PSBreakpoint to display the breakpoint object. This lets you verify that the value of the Enabled property of the breakpoint object is True.

    The results are shown in the following sample output.

    ————————– EXAMPLE 4 ————————–

    C:\PS>$b = Get-PSBreakpoint -Id 3, 5

    C:\PS> Enable-PSBreakpoint -breakpoint $b

    Description
    ———–
    These commands enable a set of breakpoints by specifying their breakpoint objects.

    The first command uses the Get-PSBreakpoint cmdlet to get the breakpoints and saves them in the $b Variable.

    The second command uses the Enable-PSBreakpoint cmdlet and its Breakpoint parameter to enable the breakpoints.
    This command is the equivalent of “Enable-PSBreakpoint -Id 3, 5″.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113295
    about_debuggers
    Set-PSBreakpoint
    Disable-PSBreakpoint
    Get-PSBreakpoint
    Remove-PSBreakpoint
    Get-PSCallStack

cmdlet, Disable, WSManCredSSP

Disable-WSManCredSSP

NAME
    Disable-WSManCredSSP

SYNOPSIS
    Disables Credential Security Service Provider (CredSSP) authentication on a client computer.

SYNTAX
    Disable-WSManCredSSP [-Role] <string> [<CommonParameters>]

DESCRIPTION
    The Disable-WSManCredSPP cmdlet disables CredSSP authentication on a client or on a server computer. When CredSSP authentication is used, the user’s credentials are passed to a remote computer to be authenticated. This type of authentication is designed for commands that create a remote session from within another remote session. For example, you use this type of authentication if you want to run a background job on a remote computer.

    The cmdlet is used to disable CredSSP on the client by specifying Client in the Role parameter. The cmdlet then performs the following:

        – Disables CredSSP on the client. The WS-Management setting <localhost|computername>\Client\Auth\CredSSP is set to false.
        – Removes any WSMan/* setting from the Windows CredSSP policy AllowFreshCredentials on the client.

    The cmdlet is used to disable CredSSP on the server by specifying Server in the Role parameter. The cmdlet then performs the following:

     – Disables CredSSP on the server. The WS-Management setting <localhost|computername>\Service\Auth\CredSSP is set to false.

    Caution: CredSSP authentication delegates the user’s credentials from the local computer to a remote computer. This practice increases the security risk of the remote operation. If the remote computer is compromised, when credentials are passed to it, the credentials can be used to control the network session.

    To disable CredSSP authentication, use the Disable-WSManCredSSP cmdlet.

PARAMETERS
    -Role <string>
        Accepts one of two possible values: Client or Server. These values specify whether CredSSP should be disabled as a client or as a server.

        If the cmdlet is used to disable CredSSP on the client by specifying Client in the Role parameter, then the cmdlet performs the following:

            – Disables CredSSP on the client. The WS-Management setting <localhost|computername>\Client\Auth\CredSSP is set to false.
            – Removes any WSMan/* setting from the Windows CredSSP policy AllowFreshCredentials on the client.

        If the cmdlet is used to disable CredSSP on the server by specifying Server in the Role parameter, the cmdlet performs the following:

         – Disables CredSSP on the server. The WS-Management setting <localhost|computername>\Service\Auth\CredSSP is set to false.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        This cmdlet does not accept any input.

OUTPUTS
    None
        This cmdlet does not generate any output.

NOTES

        To enable CredSSP authentication, use the Enable-WSManCredSSP cmdlet.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Disable-WSManCredSSP -Role Client

    Description
    ———–
    This command disables CredSSP on the client, which prevents delegation to servers.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Disable-WSManCredSSP -Role Server

    Description
    ———–
    This command disables CredSSP on the server, which prevents delegation from clients.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkId=141438
    Connect-WSMan
    Disconnect-WSMan
    Enable-WSManCredSSP
    Get-WSManCredSSP
    Get-WSManInstance
    Invoke-WSManAction
    New-WSManInstance
    New-WSManSessionOption
    Remove-WSManInstance
    Set-WSManInstance
    Set-WSManQuickConfig
    Test-WSMan

cmdlet, Disable, PSBreakpoint

Disable-PSBreakpoint

NAME
    Disable-PSBreakpoint

SYNOPSIS
    Disables the breakpoints in the current console.

SYNTAX
    Disable-PSBreakpoint [-Id] <Int32[]> [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Disable-PSBreakpoint [-Breakpoint] <Breakpoint[]> [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Disable-PSBreakpoint cmdlet disables breakpoints, which assures that they are not hit when the script runs. You can use it to disable all breakpoints, or you can specify breakpoints by submitting breakpoint objects or breakpoint IDs.

    Technically, this cmdlet changes the value of the Enabled property of a breakpoint object to False. To re-enable a breakpoint, use the Enable-PSBreakpoint cmdlet. Breakpoints are enabled by default when you create them by using the Set-PSBreakpoint cmdlet.

    A breakpoint is a point in a script where execution stops temporarily so that you can examine the instructions in the script. Disable-PSBreakpoint is one of several cmdlets designed for debugging Windows PowerShell scripts. For more information about the Windows PowerShell debugger, see about_debuggers.

PARAMETERS
    -Breakpoint <Breakpoint[]>
        Specifies the breakpoints to disable. Enter a Variable that contains breakpoint objects or a command that gets breakpoint objects, such as a Get-PSBreakpoint command. You can also pipe breakpoint objects to the Disable-PSBreakpoint cmdlet.

        Required?                    true
        Position?                    1
        Default value                None
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Id <Int32[]>
        Disables the breakpoints with the specified breakpoint IDs. Enter the IDs or a Variable that contains the IDs. You cannot pipe IDs to Disable-PSBreakpoint.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Returns an object representing the enabled breakpoints. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value                None
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.Automation.Breakpoint
        You can pipe a breakpoint object to Disable-PSBreakpoint.

OUTPUTS
    None or System.Management.Automation.Breakpoint
        When you use the PassThru parameter, Disable-PSBreakpoint returns an object that represents the disabled breakpoint. Otherwise, this cmdlet does not generate any output.

NOTES

    ————————– EXAMPLE 1 ————————–

    C:\PS>$b = Set-PSBreakpoint -script sample.ps1 -variable name

    C:\PS> $b | Disable-PSBreakpoint

    Description
    ———–
    These commands disable a newly-created breakpoint.

    The first command uses the Set-PSBreakpoint cmdlet to create a breakpoint on the Name Variable in the Sample.ps1 script. Then, it saves the breakpoint object in the $b Variable.

    The second command uses the Disable-PSBreakpoint cmdlet to disable the new breakpoint. It uses a pipeline operator (|) to send the breakpoint object in $b to the Disable-PSBreakpoint cmdlet.

    As a result of this command, the value of the Enabled property of the breakpoint object in $b is False.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Disable-PSBreakpoint -id 0

    Description
    ———–
    This command disables the breakpoint with breakpoint ID 0.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Disable-PSBreakpoint -Breakpoint ($b = Set-PSBreakpoint -script sample.ps1 -line 5)

    C:\PS> $b

    Description
    ———–
    This command creates a new breakpoint that is disabled until you enable it.

    It uses the Disable-PSBreakpoint cmdlet to disable the breakpoint. The value of the Breakpoint parameter is a Set-PSBreakpoint command that sets a new breakpoint, generates a breakpoint object, and saves the object in the $b Variable.

    Cmdlet parameters that take objects as their values can accept a Variable that contains the object or a command that gets or generates the object. In this case, because Set-PSBreakpoint generates a breakpoint object, it can be used as the value of the Breakpoint parameter.

    The second command displays the breakpoint object in the value of the $b Variable.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Get-PSBreakpoint | Disable-PSBreakpoint

    Description
    ———–
    This command disables all breakpoints in the current console. You can abbreviate this command as: “gbp | dbp”.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113294
    about_debuggers
    Set-PSBreakpoint
    Get-PSBreakpoint
    Enable-PSBreakpoint
    Remove-PSBreakpoint
    Get-PSCallStack

cmdlet, Disable, PSSessionConfiguration

Disable-PSSessionConfiguration

NAME
    Disable-PSSessionConfiguration

SYNOPSIS
    Denies access to the session configurations on the local computer.

SYNTAX
    Disable-PSSessionConfiguration [[-Name] <string[]>] [-Force] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Disable-PSSessionConfiguration cmdlet prevents all users of the computer from using the session configuration in a session. This is an advanced cmdlet that is designed to be used by system administrators to manage customized session configurations for their users.

    The Disable-PSSessionConfiguration cmdlet adds a “deny all” setting to the security descriptor of one or more registered session configurations. As a result, you can unregister, view, and change the configurations, but you cannot use them in a session.

    Without parameters, Disable-PSSessionConfiguration disables the Microsoft.PowerShell configuration, which is the default configuration that is used for sessions. Unless the user specifies a different configuration, both local and remote users are effectively prevented from creating any sessions that connect to the computer.

    To disable all session configurations on the computer, use Disable-PSRemoting.

PARAMETERS
    -Force [<SwitchParameter>]
        Suppresses all user prompts. By default, you are prompted to confirm each operation.

        Required?                    false
        Position?                    named
        Default value                False
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the names of session configurations to disable. Enter one or more configuration names. Wildcards are permitted. You can also pipe a string that contains a configuration name or a session configuration object to Disable-PSSessionConfiguration.

        If you omit this parameter, Disable-PSSessionConfiguration disables the Microsoft.PowerShell session configuration.

        Required?                    false
        Position?                    1
        Default value                Microsoft.PowerShell
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? true

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    Microsoft.PowerShell.Commands.PSSessionConfigurationCommands#PSSessionConfiguration, System.String
        You can pipe a session configuration object or a string that contains the name of a session configuration to Disable-PSSessionConfiguration.

OUTPUTS
    None
        This cmdlet does not return any objects.

NOTES

        To run this cmdlet on Windows Vista, Windows Server 2008, and later versions of Windows, you must start Windows PowerShell with the “Run as administrator” option.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Disable-PSSessionConfiguration

    Description
    ———–
    This command disables the Microsoft.PowerShell session configuration.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Disable-PSSessionConfiguration -Name *

    Description
    ———–
    This command disables all registered session configurations on the computer.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Disable-PSSessionConfiguration -Name Microsoft* -Force

    Description
    ———–
    This command disables all session configurations that have names that begin with “Microsoft”. The command uses the Force parameter to suppress all user prompts from the command.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Get-PSSessionConfiguration -Name MaintenanceShell, AdminShell | Disable-PSSessionConfiguration

    Description
    ———–
    This command disables the MaintenanceShell and AdminShell session configurations.

    The command uses a pipeline operator (|) to send the results of a Get-PSSessionConfiguration command to Disable-PSSessionConfiguration.

    ————————– EXAMPLE 5 ————————–

    C:\PS>Get-PSSessionConfiguration | Format-Table -property Name, Permission -auto

    Name                 Permission
    —-                 ———-
    MaintenanceShell     BUILTIN\Administrators AccessAllowed
    microsoft.powershell BUILTIN\Administrators AccessAllowed
    microsoft.powershell32 BUILTIN\Administrators AccessAllowed

    C:\PS> Disable-PSSessionConfiguration -Name MaintenanceShell -Force

    C:\PS> Get-PSSessionConfiguration | Format-Table -property Name, Permission -auto

    Name                 Permission
    —-                 ———-
    MaintenanceShell     Everyone AccessDenied, BUILTIN\Administrators AccessAllowed
    microsoft.powershell BUILTIN\Administrators AccessAllowed
    microsoft.powershell32 BUILTIN\Administrators AccessAllowed

    C:\PS> Set-PSSessionConfiguration -Name MaintenanceShell -MaximumReceivedDataSizePerCommandMB 60

    ParamName            ParamValue
    ———            ———-
    psmaximumreceived… 60

    “Restart WinRM service”
    WinRM service need to be restarted to make the changes effective. Do you want to run the command “Restart-Service winrm”?
    [Y] Yes [N] No [S] Suspend [?] Help (default is “Y”): y

    C:\PS> New-PSSession -computername localhost -configurationName MaintenanceShell

    [localhost] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_remote_Troubl
    eshooting Help topic.
        + CategoryInfo         : OpenError: (System.Manageme….RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionOpenFailed

    Description
    ———–
    This example shows the effect of disabling a session configuration.

    The first command uses the Get-SessionConfiguration and Format-Table cmdlets to display only the Name and Permission properties of the session configuration objects. This table format makes it easier to see the values of the objects. The results show that members of the Administrators group are permitted to use the session configurations.

    The second command uses the Disable-PSSessionConfiguration cmdlet to disable the MaintenanceShell session configuration. The command uses the Force parameter to suppress all user prompts.

    The third command repeats the first command. The results show that you can still get the object that represents the MaintenanceShell session configuration even though everyone is denied access to it. The “AccessDenied” entry takes precedence over all other entries in the security descriptor.

    The fourth command uses the Set-PSSessionConfiguration cmdlet to increase the MaximumDataSizePerCommandMB setting on the MaintenanceShell session configuration to 60. The results show that the command was successful even though everyone is denied access to the configuration.

    The fifth command attempts to use the MaintenanceShell session configuration in a session. It uses the New-PSSession cmdlet to create a new session and the ConfigurationName parameter to specify the MaintenanceShell configuration. The results show that the New-PSSession command fails because the user is denied access to the configuration.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=144299
    about_Session_Configurations
    Enable-PSSessionConfiguration
    Get-PSSessionConfiguration
    Register-PSSessionConfiguration
    Set-PSSessionConfiguration
    Unregister-PSSessionConfiguration
    WS-Management Provider

cmdlet, Copy, ItemProperty

Copy-ItemProperty

NAME
    Copy-ItemProperty

SYNOPSIS
    Copies a property and value from a specified location to another location.

SYNTAX
    Copy-ItemProperty [-LiteralPath] <string[]> [-Destination] <string> [-Name] <string> [-Credential <PSCredential>] [-Exclude <string[]>] [-Filter <string>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [-UseTransaction] [<CommonParameters>]

    Copy-ItemProperty [-Path] <string[]> [-Destination] <string> [-Name] <string> [-Credential <PSCredential>] [-Exclude <string[]>] [-Filter <string>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [-UseTransaction] [<CommonParameters>]

DESCRIPTION
    The Copy-ItemProperty cmdlet copies a property and value from a specified location to another location. For example, you can use Copy-ItemProperty to copy one or more Registry entries from one Registry key to another Registry key.

PARAMETERS
    -Credential <PSCredential>
        Specifies a user account that has permission to perform this action. The default is the current user.

        Type a user name, such as “User01” or “Domain01\User01”, or enter a PSCredential object, such as one generated by the Get-Credential cmdlet. If you type a user name, you will be prompted for a password.

        This parameter is not supported by any providers installed with Windows PowerShell.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Destination <string>
        Specifies the path to the destination location.

        Required?                    true
        Position?                    2
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Exclude <string[]>
        Omits the specified items. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Filter <string>
        Specifies a filter in the provider’s format or language. The value of this parameter qualifies the Path parameter. The syntax of the filter, including the use of wildcards, depends on the provider. Filters are more efficient than other parameters, because the provider applies them when retrieving the objects rather than having Windows PowerShell filter the objects after they are retrieved.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Allows the cmdlet to override restrictions such as renaming existing files as long as security is not compromised.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Include <string[]>
        Specifies only those items upon which the cmdlet will act, excluding all others.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -LiteralPath <string[]>
        Specifies a path to the item property. The value of LiteralPath is used exactly as it is typed. No characters are interpreted as wildcards. If the path includes escape characters, enclose it in single quotation marks. Single quotation marks tell Windows PowerShell not to interpret any characters as escape sequences.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Name <string>
        Specifies the name of the property to be copied.

        Required?                    true
        Position?                    3
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Returns an object representing the copied item property. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Path <string[]>
        Specifies the path to the property to be copied.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -UseTransaction [<SwitchParameter>]
        Includes the command in the active transaction. This parameter is valid only when a transaction is in progress. For more information, see about_transactions.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.String
        You can pipe a string that contains a path to Copy-ItemProperty.

OUTPUTS
    None or System.Management.Automation.PSCustomObject
        When you use the Passthru parameter, Copy-ItemProperty generates a PsCustomObject representing the copied item property. Otherwise, this cmdlet does not generate any output.

NOTES

        The Copy-ItemProperty cmdlet is designed to work with the data exposed by any provider. To list the providers available in your session, type “Get-PSProvider“. For more information, see about_providers.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Copy-Itemproperty -Path MyApplication -Destination HKLM:\Software\MyApplicationRev2 -Name MyProperty

    Description
    ———–
    This command copies the property named MyProperty from the MyApplication Registry key to the MyApplicationRev2 Registry key.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113293
    about_providers
    Clear-ItemProperty
    New-ItemProperty
    Move-ItemProperty
    Rename-ItemProperty
    Get-ItemProperty
    Set-ItemProperty

cmdlet, Debug, Process

Debug-Process

NAME
    Debug-Process

SYNOPSIS
    Debugs one or more processes running on the local computer.

SYNTAX
    Debug-Process [-Name] <string[]> [-Confirm] [-WhatIf] [<CommonParameters>]

    Debug-Process [-Id] <Int32[]> [-Confirm] [-WhatIf] [<CommonParameters>]

    Debug-Process -InputObject <Process[]> [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Debug-Process cmdlet attaches a debugger to one or more running processes on a local computer. You can specify the processes by their process name or process ID (PID), or you can pipe process objects to Debug-Process.

    Debug-Process attaches the debugger that is currently registered for the process. Before using this cmdlet, verify that a debugger is downloaded and correctly configured.

PARAMETERS
    -Id <Int32[]>
        Specifies the process IDs of the processes to be debugged. The parameter name (“-Id”) is optional.

        To find the process ID of a process, type “Get-Process“.

        Required?                    true
        Position?                    1
        Default value                None
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -InputObject <Process[]>
        Specifies the process objects that represent processes to be debugged. Enter a Variable that contains the process objects or a command that gets the process objects, such as a Get-Process command. You can also pipe process objects to Debug-Process.

        Required?                    true
        Position?                    named
        Default value
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the names of the processes to be debugged. If there is more than one process with the same name, Debug-Process attaches a debugger to all processes with that name. The parameter name (“Name”) is optional.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Int32, System.Diagnostics.Process, System.String
        You can pipe a process ID (Int32), a process object (System.Diagnostics.Process), or a process name (String) to Debug-Process.

OUTPUTS
    None
        This cmdlet does not generate any output.

NOTES

        This cmdlet uses the AttachDebugger method of the Windows Management Instrumentation (WMI) Win32_Process class. For more information about this method, see “AttachDebugger Method” in the MSDN (Microsoft Developer Network) library at http://go.microsoft.com/fwlink/?LinkId=143640.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Debug-Process -Name powershell

    Description
    ———–
    This command attaches a debugger to the PowerShell process on the computer.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Debug-Process -Name sql*

    Description
    ———–
    This command attaches a debugger to all processes that have names that begin with “sql”.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Debug-Process winlogon, explorer, outlook

    Description
    ———–
    This command attaches a debugger to the Winlogon, Explorer, and Outlook processes.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Debug-Process -id 1132, 2028

    Description
    ———–
    This command attaches a debugger to the processes that have process IDs 1132 and 2028.

    ————————– EXAMPLE 5 ————————–

    C:\PS>Get-Process powershell | Debug-Process

    Description
    ———–
    This command attaches a debugger to the PowerShell processes on the computer. It uses the Get-Process cmdlet to get the PowerShell processes on the computer, and it uses a pipeline operator (|) to send the processes to the Debug-Process cmdlet.

    To specify a particular PowerShell process, use the ID parameter of Get-Process.

    ————————– EXAMPLE 6 ————————–

    C:\PS>$pid | Debug-Process

    Description
    ———–
    This command attaches a debugger to the current PowerShell processes on the computer.

    It uses the $pid automatic Variable, which contains the process ID of the current PowerShell process. Then, it uses a pipeline operator (|) to send the process ID to the Debug-Process cmdlet.

    For more information about the $pid automatic Variable, see about_Automatic_Variables.

    ————————– EXAMPLE 7 ————————–

    C:\PS>Get-Process -computername Server01, Server02 -Name MyApp | Debug-Process

    Description
    ———–
    This command attaches a debugger to the MyApp processes on the Server01 and Server02 computers.

    It uses the Get-Process cmdlet to get the MyApp processes on the Server01 and Server02 computers. It uses a pipeline operator to send the processes to the Debug-Process cmdlet, which attaches the debuggers.

    ————————– EXAMPLE 8 ————————–

    C:\PS>$p = Get-Process powershell

    C:\PS> Debug-Process -inputobject $p

    Description
    ———–
    This command attaches a debugger to the PowerShell processes on the local computer.

    The first command uses the Get-Process cmdlet to get the PowerShell processes on the computer. It saves the resulting process object in the $p Variable.

    The second command uses the InputObject parameter of Debug-Process to submit the process object in the $p Variable to Debug-Process.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=135206
    Get-Process
    Start-Process
    Stop-Process
    Wait-Process
    Debug-Process