Tag Archives: Confirm

cmdlet, Restart, Service

Restart-Service

NAME
    Restart-Service

SYNOPSIS
    Stops and then starts one or more services.

SYNTAX
    Restart-Service [-Name] <string[]> [-Exclude <string[]>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Restart-Service -DisplayName <string[]> [-Exclude <string[]>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Restart-Service [-InputObject <ServiceController[]>] [-Exclude <string[]>] [-Force] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Restart-Service cmdlet sends a stop message and then a start message to the Windows Service Controller for a specified service. If a service was already stopped, it is started without notifying you of an error. You can specify the services by their service names or display names, or you can use the InputObject parameter to pass an object that represents each service that you want to restart.

PARAMETERS
    -DisplayName <string[]>
        Specifies the display names of services to be restarted. Wildcards are permitted.

        Required?                    true
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Exclude <string[]>
        Omits the specified services. The value of this parameter qualifies the Name parameter. Enter a name element or pattern, such as “s*”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Overrides restrictions that prevent the command from succeeding, just so the changes do not compromise security. For example, Force will stop and restart a service that has dependent services.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Include <string[]>
        Restarts only the specified services. The value of this parameter qualifies the Name parameter. Enter a name element or pattern, such as “s*”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -InputObject <ServiceController[]>
        Specifies ServiceController objects that represent the services to be restarted. Enter a Variable that contains the objects, or type a command or expression that gets the objects.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the service names of the services to be restarted.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Returns an object that represents the service. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.ServiceProcess.ServiceController, System.String
        You can pipe a service object or a string that contains a service name to Restart-Service.

OUTPUTS
    None or System.ServiceProcess.ServiceController
        When you use the PassThru parameter, Restart-Service generates a System.ServiceProcess.ServiceController object that represents the restarted service. Otherwise, this cmdlet does not generate any output.

NOTES

        Restart-Service can control services only when the current user has permission to do so. If a command does not work correctly, you might not have the required permissions.

        To find the service names and display names of the services on your system, type “Get-Service“. The service names appears in the Name column, and the display names appear in the DisplayName column.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Restart-Service wmi

    Description
    ———–
    This command restarts the Windows Management Instrumentation (WMI) service on the local computer.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Restart-Service -displayname net* -Exclude “net logon”

    Description
    ———–
    This command restarts the services that have a display name that begins with “Net”, except for the “Net Logon” service.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Get-Service net* | Where-Object {$_.Status -eq “Stopped”} | Restart-Service

    Description
    ———–
    This command starts all of the stopped network services on the computer.

    It uses the Get-Service cmdlet to get objects representing the services whose service name begins with “net”. (The optional Name parameter name is omitted.) The pipeline operator (|) sends the services object to the Where-Object cmdlet, which selects only the services with a status of “stopped.” Another pipeline operator sends the selected services to Restart-Service. In practice, you would use the WhatIf parameter to see the effect of the command before using it.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113385
    Start-Service
    Stop-Service
    Suspend-Service
    Resume-Service
    New-Service
    Get-Service
    Set-Service

cmdlet, Computer, Restore

Restore-Computer

NAME
    Restore-Computer

SYNOPSIS
    Starts a system restore on the local computer.

SYNTAX
    Restore-Computer [-RestorePoint] <int> [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Restore-Computer cmdlet restores the local computer to the specified system restore point.

    A Restore-Computer command restarts the computer. The restore is completed during the restart operation.

PARAMETERS
    -RestorePoint <int>
        Specifies the sequence number of the restore point. To find the sequence number, use Get-ComputerRestorePoint. This parameter is required.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        You cannot pipe input to this cmdlet.

OUTPUTS
    None
        This cmdlet does not generate any output.

NOTES

        To run a Restore-Computer command on Windows Vista and later versions of Windows, open Windows PowerShell with the “Run as administrator” option.

        This cmdlet uses the Windows Management Instrumentation (WMI) SystemRestore class.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Restore-Computer -RestorePoint 253

    Description
    ———–
    This command restores the local computer to the restore point with sequence number 253.

    Because the RestorePoint parameter is positional, you can omit the parameter name.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Restore-Computer 255 -Confirm

    Confirm
    Are you sure you want to perform this action?
    Performing operation “Restore-Computer” .
    [Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is “Y”):

    Description
    ———–
    This command restores the local computer to the restore point with sequence number 255. It uses the Confirm parameter to prompt the user before actually performing the operation.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Get-ComputerRestorePoint

    C:\PS> Restore-Computer -RestorePoint 255

    C:\PS> Get-ComputerRestorePoint -LastStatus

    Description
    ———–
    These commands run a system restore and then check its status.

    The first command uses the Get-ComputerRestorePoint cmdlet to get the restore points on the local computer.

    The second command uses Restore-Computer to restore the computer to the restore point with sequence number 255.

    The third command uses the LastStatus parameter of Get-ComputerRestorePoint cmdlet to check the status of the restore operation. Because the Restore-Computer command forces a restart, this command would be entered when the computer restarted.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=135254
    Get-ComputerRestorePoint
    Enable-ComputerRestore
    Disable-ComputerRestore
    Restart-Computer

cmdlet, Resume, Service

Resume-Service

NAME
    Resume-Service

SYNOPSIS
    Resumes one or more suspended (paused) services.

SYNTAX
    Resume-Service [-Name] <string[]> [-Exclude <string[]>] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Resume-Service -DisplayName <string[]> [-Exclude <string[]>] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

    Resume-Service [-InputObject <ServiceController[]>] [-Exclude <string[]>] [-Include <string[]>] [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Resume-Service cmdlet sends a resume message to the Windows Service Controller for each of the specified services. If they have been suspended, they will resume service. If they are currently running, the message is ignored. You can specify the services by their service names or display names, or you can use the InputObject parameter to pass a service object that represents the services that you want to resume.

PARAMETERS
    -DisplayName <string[]>
        Specifies the display names of the services to be resumed. Wildcards are permitted.

        Required?                    true
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Exclude <string[]>
        Omits the specified services. The value of this parameter qualifies the Name parameter. Enter a name element or pattern, such as “s*”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Include <string[]>
        Resumes only the specified services. The value of this parameter qualifies the Name parameter. Enter a name element or pattern, such as “s*”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -InputObject <ServiceController[]>
        Specifies ServiceController objects representing the services to be resumed. Enter a Variable that contains the objects, or type a command or expression that gets the objects.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the service names of the services to be resumed.

        The parameter name is optional. You can use “-Name” or its Alias, “-ServiceName”, or you can omit the parameter name.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -PassThru [<SwitchParameter>]
        Returns an object representing the service. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.ServiceProcess.ServiceController or System.String
        You can pipe a service object or a string that contains a service name to Resume-Service.

OUTPUTS
    None or System.ServiceProcess.ServiceController
        When you use the PassThru parameter, Resume-Service generates a System.ServiceProcess.ServiceController object representing the resumed service. Otherwise, this cmdlet does not generate any output.

NOTES

        The status of services that have been suspended is “Paused”. When services are resumed, their status is “Running”.

        Resume-Service can control services only when the current user has permission to do so. If a command does not work correctly, you might not have the required permissions.

        To find the service names and display names of the services on your system, type “Get-Service“. The service names appear in the Name column, and the display names appear in the DisplayName column.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Resume-Service sens

    Description
    ———–
    This command resumes the System Event Notification service (the service name is represented in the command by “sens”) on the local computer. The command uses the Name parameter to specify the service name of the service, but the command omits the parameter name because the parameter name is optional.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Get-Service | Where-Object {$_.Status -eq “Paused”} | Resume-Service

    Description
    ———–
    This command resumes all of the suspended (paused) services on the computer. The first command gets all of the services on the computer. The pipeline operator (|) passes the results to the Where-Object cmdlet, which selects the services with a Status property of “Paused”. The next pipeline operator sends the results to Resume-Service, which resumes the paused services.

    In practice, you would use the WhatIf parameter to determine the effect of the command before running it without WhatIf.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113386
    Get-Service
    Start-Service
    Stop-Service
    Restart-Service
    Suspend-Service
    Set-Service
    New-Service

cmdlet, PSBreakpoint, Remove

Remove-PSBreakpoint

NAME
    Remove-PSBreakpoint

SYNOPSIS
    Deletes breakpoints from the current console.

SYNTAX
    Remove-PSBreakpoint [-Id] <Int32[]> [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-PSBreakpoint [-Breakpoint] <Breakpoint[]> [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Remove-PSBreakpoint cmdlet deletes a breakpoint. Enter a breakpoint object or a breakpoint ID.

    When you remove a breakpoint, the breakpoint object is no longer available or Functional. If you have saved a breakpoint object in a Variable, the reference still exists, but the breakpoint does not Function.

    Remove-PSBreakpoint is one of several cmdlets designed for debugging Windows PowerShell scripts. For more information about the Windows PowerShell debugger, see about_debuggers.

PARAMETERS
    -Breakpoint <Breakpoint[]>
        Specifies the breakpoints to delete. Enter a Variable that contains breakpoint objects or a command that gets breakpoint objects, such as a Get-PSBreakpoint command. You can also pipe breakpoint objects to Remove-PSBreakpoint.

        Required?                    true
        Position?                    1
        Default value                None
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Id <Int32[]>
        Deletes breakpoints with the specified breakpoint IDs.

        Required?                    true
        Position?                    1
        Default value                None
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.Automation.Breakpoint
        You can pipe breakpoint objects to Remove-PSBreakpoint.

OUTPUTS
    None
        The cmdlet does not generate any output.

NOTES

    ————————– EXAMPLE 1 ————————–

    C:\PS>get-Breakpoint | remove-Breakpoint

    Description
    ———–
    This command deletes all of the breakpoints in the current console.

    ————————– EXAMPLE 2 ————————–

    C:\PS>$b = Set-PSBreakpoint -script sample.ps1 -variable Name

    C:\PS> $b | Remove-PSBreakpoint

    Description
    ———–
    This command deletes a breakpoint.

    The first command uses the Set-PSBreakpoint cmdlet to create a breakpoint on the Name Variable in the Sample.ps1 script. Then, it saves the breakpoint object in the $b Variable.

    The second command uses the Remove-PSBreakpoint cmdlet to delete the new breakpoint. It uses a pipeline operator (|) to send the breakpoint object in the $b Variable to the Remove-PSBreakpoint cmdlet.

    As a result of this command, if you run the script, it runs to completion without stopping. Also, the Get-PSBreakpoint cmdlet does not return this breakpoint.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Remove-PSBreakpoint -id 2

    Description
    ———–
    This command deletes the breakpoint with breakpoint ID 2.

    ————————– EXAMPLE 4 ————————–

    C:\PS>function del-psb { Get-PSBreakpoint | Remove-PSBreakpoint }

    Description
    ———–
    This simple Function deletes all of the breakpoints in the current console. It uses the Get-PSBreakpoint cmdlet to get the breakpoints. Then, it uses a pipeline operator (|) to send the breakpoints to the Remove-PSBreakpoint cmdlet, which deletes them.

    As a result, you can type “del-psb” instead of the longer command.

    To save the Function, add it to your Windows PowerShell profile.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113375
    about_debuggers
    Set-PSBreakpoint
    Get-PSBreakpoint
    Enable-PSBreakpoint
    Disable-PSBreakpoint
    Get-PSCallStack

cmdlet, PSDrive, Remove

Remove-PSDrive

NAME
    Remove-PSDrive

SYNOPSIS
    Removes a Windows PowerShell drive from its location.

SYNTAX
    Remove-PSDrive [-LiteralName] <string[]> [-Force] [-PSProvider <string[]>] [-Scope <string>] [-Confirm] [-WhatIf] [-UseTransaction] [<CommonParameters>]

    Remove-PSDrive [-Name] <string[]> [-Force] [-PSProvider <string[]>] [-Scope <string>] [-Confirm] [-WhatIf] [-UseTransaction] [<CommonParameters>]

DESCRIPTION
    The Remove-PSDrive cmdlet deletes Windows PowerShell drives that you created by using New-PSDrive.

    Remove-PSDrive cannot delete Windows drives or mapped network drives created by using other methods and it cannot delete the current working drive.

PARAMETERS
    -Force [<SwitchParameter>]
        Allows the cmdlet to remove the current Windows PowerShell drive.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -LiteralName <string[]>
        Specifies the name of the Windows PowerShell drive.

        The value of LiteralName is used exactly as typed. No characters are interpreted as wildcards. If the name includes escape characters, enclose it in single quotation marks (‘). Single quotation marks instruct Windows PowerShell not to interpret any characters as escape sequences.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the names of the Windows PowerShell drives to remove. Do not type a colon (:) after the drive name.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -PSProvider <string[]>
        Removes all of the Windows PowerShell drives associated with the specified Windows PowerShell provider.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Scope <string>
        Accepts an index that identifies the scope from which the drive is being removed.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -UseTransaction [<SwitchParameter>]
        Includes the command in the active transaction. This parameter is valid only when a transaction is in progress. For more information, see about_transactions.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.Automation.PSDriveInfo
        You can pipe a drive object to Remove-PSDrive.

OUTPUTS
    None
        This cmdlet does not return any output.

NOTES

        The Remove-PSDrive cmdlet is designed to work with the data exposed by any provider. To list the providers available in your session, type “Get-PSProvider“. For more information, see about_providers.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Remove-PSDrive -Name smp

    Description
    ———–
    This command removes a Windows PowerShell drive named “smp”.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113376
    about_providers
    Get-PSDrive
    New-PSDrive

cmdlet, PSSession, Remove

Remove-PSSession

NAME
    Remove-PSSession

SYNOPSIS
    Closes one or more Windows PowerShell sessions (PSSessions).

SYNTAX
    Remove-PSSession [[-ComputerName] <string[]>] [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-PSSession [-Id] <Int32[]> [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-PSSession [-InstanceId <Guid[]>] [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-PSSession [-Name <string[]>] [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-PSSession [-Session] <PSSession[]> [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Remove-PSSession cmdlet closes Windows PowerShell sessions (PSSessions) in the current session. It stops any commands that are running in the PSSessions, ends the PSSession, and releases the resources that the PSSession was using. If the PSSession is connected to a remote computer, Remove-PSSession also closes the connection between the local and remote computers.

    To remove a PSSession, enter the Name, ComputerName, ID, or InstanceID of the session.

    If you have saved the PSSession in a Variable, the session object remains in the Variable, but the state of the PSSession is “Closed.”

PARAMETERS
    -ComputerName <string[]>
        Closes the PSSessions that are connected to the specified computers. Wildcards are permitted.

        Type the NetBIOS name, an IP address, or a fully qualified domain name of one or more remote computers. To specify the local computer, type the computer name, “localhost”, or a dot (.).

        Required?                    false
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? true

    -Id <Int32[]>
        Closes the PSSessions with the specified IDs. Type one or more IDs (separated by commas) or use the range operator (..) to specify a range of IDs

        An ID is an integer that uniquely identifies the PSSession in the current session. It is easier to remember and type than the InstanceId, but it is unique only within the current session. To find the ID of a PSSession, use Get-PSSession without parameters.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -InstanceId <Guid[]>
        Closes the PSSessions with the specified instance IDs.

        The instance ID is a GUID that uniquely identifies a PSSession in the current session. The InstanceID is unique, even when you have multiple sessions running on a single computer.

        The InstanceID is stored in the InstanceID property of the object that represents a PSSession. To find the InstanceID of the PSSessions in the current session, type “Get-PSSession | Format-Table Name, ComputerName, InstanceId”.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Name <string[]>
        Closes the PSSessions with the specified friendly names. Wildcards are permitted.

        Because the friendly name of a PSSession might not be unique, when using the Name parameter, consider also using the WhatIf or Confirm parameter in the Remove-PSSession command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? true

    -Session <PSSession[]>
        Specifies the session objects of the PSSessions to close. Enter a Variable that contains the PSSessions or a command that creates or gets the PSSessions, such as a New-PSSession or Get-PSSession command. You can also pipe one or more session objects to Remove-PSSession.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByValue, ByPropertyName)
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.Automation.Runspaces.PSSession
        You can pipe a session object to Remove-PSSession.

OUTPUTS
    None
        Remove-PSSession does not return any objects.

NOTES

        The ID parameter is mandatory. You cannot type “Remove-PSSession” without parameters. To delete all the PSSessions in the current session, type “Get-PSSession | Remove-PSSession“.

        A PSSession uses a persistent connection to a remote computer. Create a PSSession to run a series of commands that share data. For more information, see about_pssessions.

        PSSessions are specific to the current session. When you end a session, the PSSessions that you created in that session are forcibly closed.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Remove-PSSession -Id 1, 2

    Description
    ———–
    This command removes the PSSessions that have IDs 1 and 2.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Get-PSSession | Remove-PSSession

    C:\PS> Remove-PSSession -session (Get-PSSession)

    C:\PS> $s = Get-PSSession
    C:\PS> Remove-PSSession -session $s”.

    Description
    ———–
    These commands remove all of the PSSessions in the current session. Although the three command formats look different, they have the same effect.

    ————————– EXAMPLE 3 ————————–

    C:\PS>$r = Get-PSSession -computername Serv*

    $r | Remove-PSSession

    Description
    ———–
    These commands close the PSSessions that are connected to computers that have names that begin with “Serv”.

    ————————– EXAMPLE 4 ————————–

    C:\PS>Get-PSSession | where {$_.port -eq 90} | Remove-PSSession

    Description
    ———–
    This command closes the PSSessions that are connected to port 90. You can use this command format to identify PSSessions by properties other than ComputerName, Name, InstanceID, and ID.

    ————————– EXAMPLE 5 ————————–

    C:\PS>Get-PSSession | ft computername, instanceID -auto

    ComputerName InstanceId
    ———— —————-
    Server01     875d231b-2788-4f36-9f67-2e50d63bb82a
    localhost    c065ffa0-02c4-406e-84a3-dacb0d677868
    Server02     4699cdbc-61d5-4e0d-b916-84f82ebede1f
    Server03     4e5a3245-4c63-43e4-88d0-a7798bfc2414
    TX-TEST-01 fc4e9dfa-f246-452d-9fa3-1adbdd64ae85

    C:\PS> Remove-PSSession -InstanceID fc4e9dfa-f246-452d-9fa3-1adbdd64ae85

    Description
    ———–
    These commands show how to close a PSSession based on its instance ID (RemoteRunspaceID).

    The first command uses the Get-PSSession cmdlet to get the PSSessions in the current session. It uses a pipeline operator (|) to send the PSSessions to the Format-Table cmdlet (alias: ft), which formats their ComputerName and InstanceID properties in a table. The AutoSize parameter (“auto”) compresses the columns for display.

    From the resulting display, the administrator can identify the PSSession to be closed, and copy and paste the InstanceID of that PSSession into the second command.

    The second command uses the Remove-PSSession cmdlet to remove the PSSession with the specified instance ID.

    ————————– EXAMPLE 6 ————————–

    C:\PS>function EndPSS { Get-PSSession | Remove-PSSession }

    Description
    ———–
    This Function deletes all of the PSSessions in the current session. After you add this Function to your Windows Powershell profile, to delete all sessions, just type “endpss”.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=135250
    about_pssessions
    about_remote
    New-PSSession
    Get-PSSession
    Enter-PSSession
    Exit-PSSession
    Invoke-Command

cmdlet, PSSnapin, Remove

Remove-PSSnapin

NAME
    Remove-PSSnapin

SYNOPSIS
    Removes Windows PowerShell snap-ins from the current session.

SYNTAX
    Remove-PSSnapin [-Name] <string[]> [-PassThru] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Remove-PSSnapin cmdlet removes a Windows PowerShell snap-in from the current session. You can use it to remove snap-ins that you have added to Windows PowerShell, but you cannot use it to remove the snap-ins that are installed with Windows PowerShell.

    After a snap-in is removed from the current session, it is still loaded, but the cmdlets and providers in the snap-in are no longer available in the session.

PARAMETERS
    -Name <string[]>
        Specifies the names of Windows PowerShell snap-ins to remove from the current session. The parameter name (“Name”) is optional, and wildcard characters (*) are permitted in the value.

        Required?                    true
        Position?                    1
        Default value                None
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? true

    -PassThru [<SwitchParameter>]
        Returns an object representing the snap-in. By default, this cmdlet does not generate any output.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.Automation.PSSnapInInfo
        You can pipe a snap-in object to Remove-PSSnapin.

OUTPUTS
    None or System.Management.Automation.PSSnapInInfo
        By default, Remove-PSSnapin does not generate any output. However, if you use the PassThru parameter, it generates a System.Management.Automation.PSSnapInInfo object representing the snap-in.

NOTES

        You can also refer to Remove-PSSnapin by its built-in Alias, “rsnp”. For more information, see about_aliases.

        Remove-PSSnapin does not check the version of Windows PowerShell before removing a snap-in from the session. If a snap-in cannot be removed, a warning appears and the command fails.

        Remove-PSSnapin affects only the current session. If you have added an Add-PSSnapin command to your Windows PowerShell profile, you should delete the command to remove the snap-in from future sessions. For instructions, see about_profiles.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Remove-PSSnapin -Name Microsoft.Exchange

    Description
    ———–
    This command removes the Microsoft.Exchange snap-in from the current session. When the command is complete, the cmdlets and providers that the snap-in supported are not available in the session.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Get-PSSnapin smp* | Remove-PSSnapin

    Description
    ———–
    This command removes the Windows PowerShell snap-ins that have names beginning with “smp” from the current session.

    The command uses the Get-PSSnapin cmdlet to get objects representing the snap-ins. The pipeline operator (|) sends the results to the Remove-PSSnapin cmdlet, which removes them from the session. The providers and cmdlets that this snap-in supports are no longer available in the session.

    When you pipe objects to Remove-PSSnapin, the names of the objects are associated with the Name parameter, which accepts objects from the pipeline that have a Name property.

    ————————– EXAMPLE 3 ————————–

    C:\PS>Remove-PSSnapin -Name *event*

    Description
    ———–
    This command removes all Windows PowerShell snap-ins that have names that include “event”. This command specifies the “Name” parameter name, but the parameter name can be omitted because it is optional.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113378
    Add-PSSnapin
    Get-PSSnapin
    about_profiles

cmdlet, Remove, Variable

Remove-Variable

NAME
    Remove-Variable

SYNOPSIS
    Deletes a Variable and its value.

SYNTAX
    Remove-Variable [-Name] <string[]> [-Exclude <string[]>] [-Force] [-Include <string[]>] [-Scope <string>] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Remove-Variable cmdlet deletes a Variable and its value from the scope in which it is defined, such as the current session. You cannot use this cmdlet to delete Variables that are set as constants or those that are owned by the system.

PARAMETERS
    -Exclude <string[]>
        Omits the specified items. The value of this parameter qualifies the Name parameter. Enter a name element or pattern, such as “s*”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Allows the cmdlet to remove a Variable even if it is read-only. Even using the Force parameter, the cmdlet cannot remove a constant.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Include <string[]>
        Deletes only the specified items. The value of this parameter qualifies the Name parameter. Enter a name element or pattern, such as “s*”. Wildcards are permitted.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Name <string[]>
        Specifies the name of the Variable to be removed. The parameter name (“Name”) is optional.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     true (ByPropertyName)
        Accept wildcard characters? false

    -Scope <string>
        Specifies the scope in which this Alias is valid. Valid values are “Global”, “Local”, or “Script”, or a number relative to the current scope (0 through the number of scopes, where 0 is the current scope and 1 is its parent). “Local” is the default. For more information, see about_scopes.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.Automation.PSVariable
        You can pipe a Variable object to Remove-Variable.

OUTPUTS
    None
        This cmdlet does not return any output.

NOTES

        Changes affect only the current scope, such as a session. To delete a Variable from all sessions, add a Remove-Variable command to your Windows PowerShell profile.

        You can also refer to RemoveVariable by its built-in Alias, “rv”. For more information, see about_aliases.

    ————————– EXAMPLE 1 ————————–

    C:\PS>Remove-Variable Smp

    Description
    ———–
    This command deletes the $Smp Variable.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113380
    Set-Variable
    Get-Variable
    Clear-Variable
    New-Variable
    about_profiles

cmdlet, Remove, WmiObject

Remove-WmiObject

NAME
    Remove-WmiObject

SYNOPSIS
    Deletes an instance of an existing Windows Management Instrumentation (WMI) class.

SYNTAX
    Remove-WmiObject [-Class] <string> [-Authentication {Default | None | Connect | Call | Packet | PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <string>] [-ComputerName <string[]>] [-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify | Impersonate | Delegate}] [-Locale <string>] [-Namespace <string>] [-AsJob] [-ThrottleLimit <int>] [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-WmiObject [-Authentication {Default | None | Connect | Call | Packet | PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <string>] [-ComputerName <string[]>] [-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify | Impersonate | Delegate}] [-Locale <string>] [-Namespace <string>] [-AsJob] [-ThrottleLimit <int>] [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-WmiObject -InputObject <ManagementObject> [-AsJob] [-ThrottleLimit <int>] [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-WmiObject -Path <string> [-Authentication {Default | None | Connect | Call | Packet | PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <string>] [-ComputerName <string[]>] [-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify | Impersonate | Delegate}] [-Locale <string>] [-Namespace <string>] [-AsJob] [-ThrottleLimit <int>] [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-WmiObject [-Authentication {Default | None | Connect | Call | Packet | PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <string>] [-ComputerName <string[]>] [-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify | Impersonate | Delegate}] [-Locale <string>] [-Namespace <string>] [-AsJob] [-ThrottleLimit <int>] [-Confirm] [-WhatIf] [<CommonParameters>]

    Remove-WmiObject [-Authentication {Default | None | Connect | Call | Packet | PacketIntegrity | PacketPrivacy | Unchanged}] [-Authority <string>] [-ComputerName <string[]>] [-Credential <PSCredential>] [-EnableAllPrivileges] [-Impersonation {Default | Anonymous | Identify | Impersonate | Delegate}] [-Locale <string>] [-Namespace <string>] [-AsJob] [-ThrottleLimit <int>] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Remove-WmiObject cmdlet deletes an instance of an existing WMI class.

PARAMETERS
    -AsJob [<SwitchParameter>]
        Runs the command as a background job. Use this parameter to run commands that take an extensive time to complete.
        Runs the command as a background job. Use this parameter to run commands that take a long time to finish.

        When you use the AsJob parameter, the command returns an object that represents the background job and then displays the command prompt. You can continue to work in the session while the job finishes. If Remove-WmiObject is used against a remote computer, the job is created on the local computer, and the results from remote computers are automatically returned to the local computer. To manage the job, use the cmdlets that contain the Job noun (the Job cmdlets). To get the job results, use the Receive-Job cmdlet.

        Note: To use this parameter with remote computers, the local and remote computers must be configured for remoting. Additionally, you must start Windows PowerShell by using the “Run as administrator” option in Windows Vista and later versions of Windows,. For more information, see about_remote_requirements.

        For more information about Windows PowerShell background jobs, see about_jobs and about_remote_Jobs.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Authentication <AuthenticationLevel>
        Specifies the authentication level to be used with the WMI connection. Valid values are:

        -1: Unchanged
        0: Default
        1: None (No authentication in performed.)
        2: Connect (Authentication is performed only when the client establishes a relationship with the application.)
        3: Call (Authentication is performed only at the beginning of each call when the application receives the request.)
        4: Packet (Authentication is performed on all the data that is received from the client.)
        5: PacketIntegrity (All the data that is transferred between the client and the application is authenticated and verified.)
        6: PacketPrivacy (The properties of the other authentication levels are used, and all the data is encrypted.)

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Authority <string>
        Specifies the authority to use to authenticate the WMI connection. You can specify standard NTLM or Kerberos authentication. To use NTLM, set the authority setting to “ntlmdomain:<DomainName>”, where <DomainName> identifies a valid NTLM domain name. To use Kerberos, specify “kerberos:<DomainName>\<ServerName>”. You cannot include the authority setting when you connect to the local computer.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Class <string>
        Specifies the name of a WMI class that you want to delete.

        Required?                    true
        Position?                    1
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ComputerName <string[]>
        Specifies the computer against which you want to run the management operation. The value can be a fully qualified domain name, a NetBIOS name, or an IP address. Use the local computer name, use localhost, or use a dot (.) to specify the local computer. The local computer is the default. When the remote computer is in a different domain from the user, you must use a fully qualified domain name. You can set the value of this parameter by piping the value to the parameter.

        This parameter does not rely on Windows PowerShell remoting, which uses WS-Management ). You can use the ComputerName parameter of Get-WmiObject even if your computer is not configured to run WS-Management remote commands.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Credential <PSCredential>
        Specifies a user account that has permission to perform this action. The default is the current user. Type a user name, such as “User01”, “Domain01\User01”, or “User@Contoso.com”. Or, enter a PSCredential object, such as an object that is returned by the Get-Credential cmdlet. When you type a user name, you will be prompted for a password.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -EnableAllPrivileges [<SwitchParameter>]
        Enables all the privileges of the current user before the command makes the WMI call.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Impersonation <ImpersonationLevel>
        Specifies the impersonation level to use. Valid values are:

        0: Default (Reads the local Registry for the default impersonation level, which is usually set to “3: Impersonate”.)
        1: Anonymous (Hides the credentials of the caller.)
        2: Identify (Allows objects to query the credentials of the caller.)
        3: Impersonate (Allows objects to use the credentials of the caller.)
        4: Delegate (Allows objects to permit other objects to use the credentials of the caller.)

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -InputObject <ManagementObject>
        Specifies a ManagementObject object to use as input. When this parameter is used, all other parameters are ignored.

        Required?                    true
        Position?                    named
        Default value
        Accept pipeline input?     true (ByValue)
        Accept wildcard characters? false

    -Locale <string>
        Specifies the preferred locale for WMI objects. The Locale parameter is specified as an array in the MS_<LCID> format in the preferred order.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Namespace <string>
        When used with the Class parameter, this parameter specifies the WMI repository namespace where the referenced WMI class is located.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Path <string>
        Specifies the WMI object path of a WMI class, or specifies the WMI object path of an instance of a WMI class to delete.

        Required?                    true
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ThrottleLimit <int>
        Allows the user to specify a throttling value for the number of WMI operations that can be executed simultaneously. This parameter is used together with the AsJob parameter. The throttle limit applies only to the current command, not to the session or to the computer.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    System.Management.ManagementObject
        You can pipe a management object to Remove-WmiObject.

OUTPUTS
    None or System.Management.Automation.RemotingJob
        When you use the AsJob parameter, this cmdlet returns a job object. Otherwise, it does not generate any output.

NOTES

    ————————– EXAMPLE 1 ————————–

    C:\PS>notepad
    C:\PS> $np = Get-WmiObject -query “select * from win32_process where name=’notepad.exe'”
    C:\PS> $np | Remove-WmiObject

    Description
    ———–
    This command closes all the instances of Notepad.exe.

    The first command starts an instance of Notepad.

    The second command uses the Get-WmiObject cmdlet to retrieve the instances of the Win32_Process that correspond to Notepad.exe and stores them in the $np Variable.

    The third command passes the object in the $np Variable to the Remove-WmiObject cmdlet, which deletes all the instances of Notepad.exe.

    ————————– EXAMPLE 2 ————————–

    C:\PS>$a = Get-WmiObject -query “Select * From Win32_Directory Where Name =’C:\\Test'”
    C:\PS> $a | Remove-WmiObject

    Description
    ———–
    This command deletes the C:\Test directory.

    The first command uses the Get-WmiObject cmdlet to query for the C:\Test directory and then stores the object in the $a Variable.

    The second command pipes the $a Variable to the Remove-WmiObject, which deletes the directory.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=113381
    Get-WmiObject
    Invoke-WmiMethod
    Set-WmiInstance
    Get-WSManInstance
    Invoke-WSManAction
    New-WSManInstance
    Remove-WSManInstance

cmdlet, PSSessionConfiguration, Register

Register-PSSessionConfiguration

NAME
    Register-PSSessionConfiguration

SYNOPSIS
    Creates and registers a new session configuration.

SYNTAX
    Register-PSSessionConfiguration [-AssemblyName] <string> [-ConfigurationTypeName] <string> [-ApplicationBase <string>] [-Name] <string> [-Force] [-MaximumReceivedDataSizePerCommandMB <double>] [-MaximumReceivedObjectSizeMB <double>] [-NoServiceRestart] [-ProcessorArchitecture <string>] [-SecurityDescriptorSddl <string>] [-ShowSecurityDescriptorUI] [-StartupScript <string>] [-ThreadApartmentState {STA | MTA | Unknown}] [-ThreadOptions {Default | UseNewThread | ReuseThread | UseCurrentThread}] [-Confirm] [-WhatIf] [<CommonParameters>]

DESCRIPTION
    The Register-PSSessionConfiguration cmdlet creates and registers a new session configuration on the local computer. This is an advanced cmdlet that is designed to be used by system administrators to manage customized session configurations for their users.

    Every Windows PowerShell remote session uses a session configuration. When users create a session that connects to the computer, they can select a configuration or use the default configurations that are registered when you enable Windows PowerShell remoting. Users can also set the $PSSessionConfigurationName preference Variable, which specifies a default configuration for sessions created in the current session.

    The session configuration configures the Environment for the session. You can define the configuration by using an assembly that implements a new configuration class and by using a script that runs in the session. The configuration can determine which commands are available in the session, and it can include settings that protect the computer, such as those that limit the amount of data that the session can receive remotely in a single object or command. You can also specify a security descriptor that determines the permissions that are required to use the configuration.

PARAMETERS
    -ApplicationBase <string>
        Specifies the path to the assembly file (*.dll) that is specified in the value of the AssemblyName parameter. Use this parameter when the value of the AssemblyName parameter does not include a path. The default is the current directory.

        Required?                    false
        Position?                    named
        Default value                Current directory
        Accept pipeline input?     false
        Accept wildcard characters? false

    -AssemblyName <string>
        Specifies the name of an assembly file (*.dll) in which the configuration type is defined. You can specify the path to the .dll in this parameter or in the value of the ApplicationBase parameter.

        This parameter is required when the ConfigurationTypeName parameter is specified.

        Required?                    true
        Position?                    2
        Default value                None
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ConfigurationTypeName <string>
        Specifies the fully qualified name of the Microsoft .NET Framework type that is used for this configuration. The type that you specify must implement the System.Management.Automation.Remoting.PSSessionConfiguration class.

        To specify the assembly file (.dll) that implements the configuration type, use the AssemblyName and AssemblyBase parameters.

        Creating a type allows you to control more aspects of the session configuration, such as exposing or hiding certain parameters of cmdlets, or setting data size and object size limits that users cannot override.

        If you omit this parameter, the DefaultRemotePowerShellConfiguration class is used for the session configuration.

        Required?                    true
        Position?                    3
        Default value                System.Management.Automation.Remoting.PSSessionConfiguration
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Force [<SwitchParameter>]
        Suppresses all users prompts and restarts the WinRM service without prompting. Restarting the service makes the configuration change effective.

        To prevent a restart and suppress the restart prompt, use the NoServiceRestart parameter.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -MaximumReceivedDataSizePerCommandMB <double>
        Limits the amount of data that can be sent to this computer in any single remote command. Enter the data size in megabytes (MB). The default is 50 MB.

        If a data size limit is defined in the configuration type that is specified in the ConfigurationTypeName parameter, the limit in the configuration type is used and the value of this parameter is ignored.

        Required?                    false
        Position?                    named
        Default value                50
        Accept pipeline input?     false
        Accept wildcard characters? false

    -MaximumReceivedObjectSizeMB <double>
        Limits the amount of data that can be sent to this computer in any single object. Enter the data size in megabytes (MB). The default is 10 MB.

        If an object size limit is defined in the configuration type that is specified in the ConfigurationTypeName parameter, the limit in the configuration type is used and the value of this parameter is ignored.

        Required?                    false
        Position?                    named
        Default value                10
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Name <string>
        Specifies a name for the session configuration. This parameter is required.

        Required?                    true
        Position?                    1
        Default value                None
        Accept pipeline input?     false
        Accept wildcard characters? false

    -NoServiceRestart [<SwitchParameter>]
        Does not restart the WinRM service, and suppresses the prompt to restart the service.

        By default, when you enter a Register-PSSessionConfiguration command, you are prompted to restart the WinRM service to make the new session configuration effective. Until the WinRM service is restarted, the new session configuration is not effective.

        To restart the WinRM service without prompting, use the Force parameter. To restart the WinRM service manually, use the Restart-Service cmdlet.

        Required?                    false
        Position?                    named
        Default value                False
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ProcessorArchitecture <string>
        Specifies a processor architecture for the configuration. This value determines whether a 32-bit or 64-bit version of the process that hosts Windows PowerShell is started when the configuration is used. Valid values are x86, AMD64, and IA64.

        The default is determined by the processor architecture of the computer that hosts the session configuration.

        Required?                    false
        Position?                    named
        Default value                The processor architecture of the host computer.
        Accept pipeline input?     false
        Accept wildcard characters? false

    -SecurityDescriptorSddl <string>
        Specifies a Security Descriptor Definition Language (SDDL) string for the configuration.

        This string determines the permissions that are required to use the new session configuration. To use a session configuration in a session, users must have at least “Execute(Invoke)” permission for the configuration.

        If the security descriptor is complex, consider using the ShowSecurityDescriptorUI parameter instead of this parameter. You cannot use both parameters in the same command.

        If you omit this parameter, the root SDDL for the WinRM service is used for this configuration. To view or change the root SDDL, use the WS-Management provider. For example “Get-Item WSMan:\localhost\service\rootSDDL”. For more information about the WS-Management provider, type “Get-Help WSMan“.

        Required?                    false
        Position?                    named
        Default value                The value of the root SDDL
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ShowSecurityDescriptorUI [<SwitchParameter>]
        Displays a property sheet that helps you to create the SDDL for the session configuration. The property sheet appears after you enter the Register-PSSessionConfiguration command and then restart the WinRM service.

        When setting the permissions for the configuration, remember that users must have at least “Execute(Invoke)” permission to use the session configuration in a session.

        You cannot use the SecurityDescriptorSDDL parameter and this parameter in the same command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -StartupScript <string>
        Specifies the fully qualified path to a Windows PowerShell script. The specified script runs in the new session that uses the session configuration.

        You can use the script to further configure the session. If the script generates an error (even a non-terminating error), the session is not created and the user’s New-PSSession command fails.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ThreadApartmentState <ApartmentState>
        Determines the apartment state of the threads in the session. Valid values are STA, MTA, and Unknown. Unknown is the default.

        Required?                    false
        Position?                    named
        Default value                Unknown
        Accept pipeline input?     false
        Accept wildcard characters? false

    -ThreadOptions <PSThreadOptions>
        Defines how threads are created and used when a command is executed in the session. Valid values are Default, ReuseThread, UseCurrentThread, and UseNewThread. UseCurrentThread is the default.

        Required?                    false
        Position?                    named
        Default value                UseCurrentThread
        Accept pipeline input?     false
        Accept wildcard characters? false

    -Confirm [<SwitchParameter>]
        Prompts you for confirmation before executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    -WhatIf [<SwitchParameter>]
        Describes what would happen if you executed the command without actually executing the command.

        Required?                    false
        Position?                    named
        Default value
        Accept pipeline input?     false
        Accept wildcard characters? false

    <CommonParameters>
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer and OutVariable. For more information, type,
        “Get-Help about_CommonParameters“.

INPUTS
    None
        You cannot pipe input to this cmdlet.

OUTPUTS
    Microsoft.WSMan.Management.WSManConfigContainerElement

NOTES

        To run this cmdlet on Windows Vista, Windows Server 2008, and later versions of Windows, you must start Windows PowerShell with the “Run as administrator” option.

        This cmdlet generates XML that represents a Web Services for Management (WS-Management) plug-in configuration and sends the XML to WS-Management, which registers the plug-in on the local computer (“New-Item WSMan:\localhost\plugin”).

    ————————– EXAMPLE 1 ————————–

    C:\PS>Register-PSSessionConfiguration -Name NewShell -ApplicationBase c:\MyShells\ -assemblyName MyShell.dll -configurationTypeName MyClass

    Description
    ———–
    This command registers the NewShell session configuration. It uses the ApplicationName and ApplicationBase parameters to specify the location of the MyShell.dll file, which specifies the cmdlets and providers in the session configuration. It also uses the ConfigurationTypeName parameter to specify a new class that further configures the session.

    To use this configuration, users would type “New-PSSession -configurationname newshell”.

    ————————– EXAMPLE 2 ————————–

    C:\PS>Register-PSSessionConfiguration -Name MaintenanceShell -StartupScript c:\ps-test\Maintenance.ps1

    Description
    ———–
    This command registers the MaintenanceShell configuration on the local computer. The command uses the StartupScript parameter to specify the Maintenance.ps1 script.

    When a user uses a New-PSSession command and selects the MaintenanceShell configuration, the Maintenance.ps1 script runs in the new session. The script can configure the session, including importing modules, adding Windows PowerShell snap-ins, and setting the execution policy for the session. If the script generates any errors, including non-terminating errors, the New-PSSession command fails.

    ————————– EXAMPLE 3 ————————–

    C:\PS>$sddl = “O:NSG:BAD:P(A;;GA;;;BA)S:P(AU;FA;GA;;;WD)(AU;FA;SA;GWGX;;WD)”

    C:\PS> Register-PSSessionConfiguration -Name AdminShell -SecurityDescriptorSddl $sddl -MaximumReceivedObjectSizeMB 20 -StartupScript c:\scripts\AdminShell.ps1

    Description
    ———–
    This example registers the AdminShell session configuration.

    The first command saves a custom SDDL in the $sddl Variable.

    The second command registers the new shell. The command uses the SecurityDescritorSDDL parameter to specify the SDDL in the value of the $sddl Variable and the MaximumReceivedObjectSizeMB parameter to increase the object size limit. It also uses the StartupScript parameter to specify a script that configures the session.

    As an alternative to using the SecurityDescriptorSDDL parameter, you can use the ShowSecurityDescriptorUI parameter, which displays a property sheet that you can use to set permissions for the session configuration. When you click “OK” in the property sheet, the tool generates an SDDL for the session configuration.

    ————————– EXAMPLE 4 ————————–

    C:\PS>$s = Register-PSSessionConfiguration -Name MaintenanceShell -StartupScript c:\ps-test\Maintenance.ps1

    C:\PS> $s

     WSManConfig: Microsoft.WSMan.Management\WSMan::localhost\Plugin

    Name                     Type                 Keys
    —-                     —-                 —-
    MaintenanceShell         Container            {Name=MaintenanceShell}

    C:\PS> $s.getType().fullname
    TypeName: Microsoft.WSMan.Management.WSManConfigContainerElement

    C:\PS> $s | Format-List -property *

    PSPath            : Microsoft.WSMan.Management\WSMan::localhost\Plugin\MaintenanceShell
    PSParentPath     : Microsoft.WSMan.Management\WSMan::localhost\Plugin
    PSChildName     : MaintenanceShell
    PSDrive         : WSMan
    PSProvider        : Microsoft.WSMan.Management\WSMan
    PSIsContainer     : True
    Keys             : {Name=MaintenanceShell}
    Name             : MaintenanceShell
    TypeNameOfElement : Container

    C:\PS> dir WSMan:\localhost\plugin

    Name                     Type                 Keys
    —-                     —-                 —-
    MaintenanceShell         Container            {Name=MaintenanceShell}
    microsoft.powershell     Container            {Name=microsoft.powershell}
    microsoft.powershell32    Container            {Name=microsoft.powershell32}

    Description
    ———–
    This example shows that a Register-PSSessionConfiguration command returns a WSManConfigContainerElement. It also shows how to find the container elements in the WSMan: drive.

    The first command uses the Register-PSSessionConfiguration cmdlet to register the MaintenanceShell configuration. It saves the object that the cmdlet returns in the $s Variable.

    The second command displays the contents of the $s Variable.

    The third command uses the GetType method and its FullName property to display the type name of the object that Register-PSSessionConfiguration returns.

    The fourth command uses the Format-List cmdlet to display all the properties of the object that Register-PSSessionConfiguration returns in a list. The PSPath property shows that the object is stored in a directory of the WSMan: drive.

    The fifth command uses the Get-ChildItem cmdlet to display the items in the WSMan:\LocalHost\PlugIn path. These include the new MaintenanceShell configuration and the two default configurations that come with Windows PowerShell.

    ————————– EXAMPLE 5 ————————–

    C:\PS>Register-PSSessionConfiguration -Name WithProfile -StartupScript add-profile.ps1

    # Add-Profile.ps1

    . c:\users\admin01\documents\windowspowershell\profile.ps1

    Description
    ———–
    This command creates and registers the WithProfile session configuration on the local computer. The command uses the StartupScript parameter to direct Windows PowerShell to run the specified script in any session that uses the session configuration.

    The content of the specified script, Add-Profile.ps1, is also displayed. The script contains a single command that uses dot sourcing to run the user’s CurrentUserAllHosts profile in the current scope of the session.

    For more information about profiles, see about_profiles. For more information about dot sourcing, see about_scopes.

RELATED LINKS
    Online version: http://go.microsoft.com/fwlink/?LinkID=144306
    about_Session_Configurations
    Disable-PSSessionConfiguration
    Enable-PSSessionConfiguration
    Get-PSSessionConfiguration
    Set-PSSessionConfiguration
    Unregister-PSSessionConfiguration
    WS-Management Provider